CXE480D5R-C3 C3 SEMI, CXE480D5R-C3 Datasheet - Page 2

• Manufacturer Part Number: CXE480D5R-C3
• Description: Solid State Relay PCB Mount
• Manufacturer: C3 SEMI

1. Soldering must be completed within 10 seconds at
2. The SSR case serves to dissipate heat. Install the
3. The input circuitry does not incorporate a circuit
4. When using the CX series for an AC load with a peak
260°C or less or within 5 seconds at 350°C or less.
relays so that they are adequately ventilated. If poor
ventilation is unavoidable, reduce the load current by
half.
protecting the SSR from being damaged due to a
reversed connection. Make sure that the polarity is
correct when connecting the input lines.
voltage of more than the rated, connect the load
terminals of the relay ta an inrush absorber (varistor).
For 220VAC the recommended varistor voltage is
470V. For 380VAC, the recommended varistor voltage
is 750V.
For recommended applications and more information contact:
For recommended applications and more information contact:
USA : Sales Support
USA : Sales Support
Email : [e-mail]
[phone]
WEB SITE: http://www.C3semi.com
C3 Semiconductors, LLC. All rights are reserved