G5SB-14 DC5 Omron, G5SB-14 DC5 Datasheet - Page 29

• Manufacturer Part Number: G5SB-14 DC5
• Description: POWER PCB RELAY
• Manufacturer: Omron
• Series: G5SBr

Specifications of G5SB-14 DC5

• Relay Type: General Purpose
• Contact Form: SPDT (1 Form C)
• Contact Rating (current): 5A
• Switching Voltage: 250VAC, 30VDC - Max
• Coil Type: Standard
• Coil Current: 80mA
• Coil Voltage: 5VDC
• Turn On Voltage (max): 3.75 VDC
• Turn Off Voltage (min): 0.25 VDC
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Circuit: SPDT (1 Form C)
• Contact Rating @ Voltage: 5A @ 125VAC
• Control On Voltage (max): 3.75 VDC
• Control Off Voltage (min): 0.25 VDC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: G5SB-14-DC5; G5SB14DC5; Z1640

26
Switches - Sealed Snap Action
Contact Rating(s)
* Values are for pin plunger
Mounting pitch mm (in)
Mechanical service life
Operating force (OF)*
Electrical service life
Dimensions mm (in)
Approved standards
Terminal choices
Actuator types
Resistive load
Contact form
Features
type only
15.9 H x 10.3 D x 33 W
(0.63 x 0.41 x 1.29)
• Miniature Snap Action Switch
• Sealed water-tight switch
0.1A @ 125VAC or 5A @125/250VAC
SPDT (SPST-NC, SPST-NO
per request)
200g
10,000,000 operations min.
1,000,000 operations min.
(0.1A, 125VAC)
100,000 operations min.
(3A, 125/250VAC)
10.3 x 22.2 (0.41 x 0.87)
Pin plunger, short hinge lever,
hinge lever, long hinge lever,
simulated roller lever, short hinge
roller lever, hinge roller lever
Solder/Quick connect
(#187 tab terminals) lead wires
UL, CSA (refer to “Ratings”
section of data sheet)
conforms to IP67 & IP68
**IP68 Ratings are based on specific application environments and conditions, per IEC 529. Test conditions for Grade 8
pertaining to continuous immersion are subject to prior agreement between Omron and the user. Acceptance of the test
requirements and the ratings may or may not occur, solely based on the specific conditions of each application.
Consult Omron for consideration of specific usage conditions.
D2VW
15.9 H x 10.3 D x 35.9 W
(0.63 x 0.41 x 1.41)
• Suitable for microloads to
• Internal Reed Switch sealed to
• Extended humidity operating
• Available with internally fitted
0.25A @ 100VDC
SPST-NO
153g
1,000,000 operations min.
1,000,000 operations min.
22.2mm
Pin plunger, hinge lever, hinge
roller lever, simulated roller lever
Molded lead wires
–
NEW!
1 million operations minimum
IP67 ensures stable operation
range, up to 95% RH
levers
D2RW
10.1 H x 6.4 D x 19.8 W
(0.40 x 0.25 x 0.78)
• Subminiature snap action
• Small sealed switch conforms
0.1A @ 125VAC or 3A @ 125VAC
SPDT (SPST-NC, SPST-NO
per request)
180g
5,000,000 operations min.
200,000 operations min.
(0.1 or 3A, 125VAC)
100,000 operations min.
(2A, 250VAC)
9.5 (0.37)
Pin plunger, hinge lever,
simulated roller lever, hinge roller
lever
Solder, Quick connect (#110),
PCB, lead wires
UL, CSA
switch
to IP67 & IP68
D2SW
7.7 H x 6.4 D x 19.8 W
(0.30 x 0.25 x 0.78)
• Sealed basic switch (IP67)
• Single leaf movable spring
• Microload versions available
2A @ 250VAC or 0.1A @ 125VAC
SPDT, SPST-NO, SPST-NC
183g
1,000,000 operations min.
50,000 (2 A) or 200,000 (0.1A)
operations min.
9.5mm
Pin plunger, hinge lever, hinge
roller lever, simulated roller lever
Solder, Quick connect (#110),
PCB (even & uneven pitch),
Molded lead wires
UL, CSA
construction
D2SW-P