A3AT-90K1-00B Omron, A3AT-90K1-00B Datasheet - Page 163

• Manufacturer Part Number: A3AT-90K1-00B
• Description: ASSY.L.P.B.INCLD.FLANGE/SPRING
• Manufacturer: Omron
• Series: A3Ar
• Type: Standardr

Specifications of A3AT-90K1-00B

• Circuit: SPST-NO
• Switch Function: Off-Mom
• Contact Rating @ Voltage: 6A @ 125VAC
• Actuator Type: Round Button
• Mounting Type: Panel Mount
• Termination Style: Solder Lug
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Illumination Type, Color: -
• Illumination Voltage (nominal): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: A3AT90K100B

Half-guard Indicators
Put the tips of the Cap Tightening Tool (A22Z-3908) into the Color
Cap slot and turn the Tool.
Lighted Pushbutton Switch
Mount the Color Cap so that the protrusions inside the cap fit into the
grooves in the Pushbutton Unit.
Indicator
Mount the Color Cap so that the protrusions inside the Pushbutton
Unit fit into the grooves in the cap.
Square Pushbutton/Indicator
Removing the Color Cap:
Insert the protruding tip of the Cap Puller (A3PJ-5080) into the Cap
slot, hold the plate spring, and pull them to remove the Color Cap.
Assembling the Cap
Plate spring
Grooves in the cap
Color Cap
Grooves
Color Cap
Protrusion inside cap
Protrusion
Cap
Cap
Mounting the Color Cap:
Mount the Color Cap on the flange and firmly push the Color Cap.
When the Color Cap is inserted, check whether it operates properly.
When replacing the Lamp, remove the Color Cap and diffusion plate
with fingers or Cap Puller.
Attach the Character Film properly so that it fits inside the protruding
part of the diffusion plate. Then, match the diffusion plate to the
square flange and insert the Cap.
Emergency Stop Switch
Insert the protrusion of the Tightening Wrench (A22Z-3905) into the
Cap slot and then turn to remove the Cap.
Installing/Replacing from the Panel
Surface
Insert the Lamp Extractor (A22Z-3901) into the lamp, then rotate the
Extractor while pressing it.
Installing/Replacing on the Switch
Grip the lamp with your fingers, then rotate the lamp while pressing it
against the Switch.
Installing/Replacing the Lamp
Diffusion plate
Character Film
Flange
Color Cap
161