DRT2-ID16ML Omron, DRT2-ID16ML Datasheet - Page 3

• Manufacturer Part Number: DRT2-ID16ML
• Description: DRT2 16 In MIL Connector NPN
• Manufacturer: Omron

Specifications of DRT2-ID16ML

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Using OMRON Temperature Input Terminals for
Maintenance
External load
short-circuit detection
Note: The contact operation counter function and the unit conduction time monitor function cannot be used simultaneously.
PLC
Control
information
DRT2-series
Smart Slave
Failure Prediction
and Maintenance
the I/O device is
short-circuited
The wiring to
If prolonging the
time it takes to
reach a certain
temperature may
degrade
equipment:
If it takes too long
to modify the
ladder program on
the Master when a
Temperature
Sensor is replaced:
Short Startup
or broken!
Control System
Control System
Ethernet
Operating time
monitor
The cylinder's
incorrect!
speed is
Maintenance information
DeviceNet
Configurator
The operating time of a preset temperature range is counted in 1-s units.
The peaks or valleys of temperature inputs that change in a regular pattern
are counted to predict when devices operating with severe temperature
swings are due for maintenance.
Slaves internally
convert display values
to temperature input
values so the Controller
program no longer has
to be modified to
perform this task.
Slaves can notify the
Master when a setting
is exceeded.
Unit conduction
time monitor
(See note.)
Maintenance System
Maintenance System
Contact operation
counter (See note.)
It might be time
for a switch
inspection!
maintenance!
It's time for
motor
Preventive maintenance
of equipment
Reliable equipment
startup
Semiconductor
manufacturing equipment
Scaling performed
inside the Slave
Input
I/O power status
monitor
power supply
turned ON?
Is the I/O
Reduced startup time
Reduced downtime
Operating time monitor
Contact operation counter
Unit conduction time monitor
Slave and connected component comments
communications
What is the
voltage?
present
Indicator service
life control
Communication error
history monitor
Sensor replaced by one
with a different input range
Operating time
I/O power status monitor
Network power voltage monitor
Communication error history
monitor
What was the
Scaling points for 0%
and 100% are set from
the Configurator
of the error?
cause
Network power
voltage monitor
Time
3