E8CC-B10C Omron, E8CC-B10C Datasheet - Page 7

• Manufacturer Part Number: E8CC-B10C
• Description: PRESSURE SENSOR:0to980kPa,wLCD
• Manufacturer: Omron
• Series: E8CCr

Specifications of E8CC-B10C

• Pressure Type: Gauge
• Operating Pressure: 142.14 PSI, 980 kPa
• Port Size: Male, 1/8" (3.175mm) 27 NPT
• Output: Digital
• Voltage - Supply: 12 V ~ 24 V
• Termination Style: Cable
• Operating Temperature: -10°C ~ 55°C
• Package / Case: Module
• Mounting Style: DIN Rail
• Maximum Operating Temperature: + 55 C
• Minimum Operating Temperature: - 10 C
• Operating Supply Voltage: 15 V, 18 V
• Output Voltage: 1 V to 5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: E8CCB10C

E8CB/E8CC
J CORRECT USE
Adjustment (E8CC)
1. Set the mode selector to SET.
2. Turn the pressure adjuster to the desired pressure.
Indication
0
Display
Display
30
30
(for
30 kPa)
--
ff
le
le
5h
5h
Mode
Mode
RUN
SET
RUN
SET
RUN
SET
RUN
SET
RUN
SET
- - 76
Operating
Operating
status
Normal
Normal
Abnormal
pressure
imposition
Abnormal
pressure
setting
Abnormal
pressure
imposition
Abnormal
pressure
setting
Load
overcurrent
overcurrent
Element
destruction
destruction
Description
Description
Displays pressure within the
permissible range.
Displays the ON-point pressure within
the permissible range
Positive Pressure: Indicates that the
imposed pressure is lower than the
permissible range.
Negative Pressure: Indicates that the
imposed pressure is higher than the
permissible range.
The E8CC is in normal output
operation in both cases.
Positive Pressure: Indicates that
ON-point pressure value is lower than
the permissible range.
Negative Pressure: Indicates that
ON-point pressure is higher than the
permissible range.
The E8CC is in normal output
operation in both cases.
Indicates that the imposed pressure is
higher than the permissible range.
Positive Pressure: Indicates that
ON-point pressure value is higher than
the permissible range.
Negative Pressure: Indicates that
ON-point pressure is lower than the
permissible range.
The E8CC is in normal output
operation in both cases.
Indicates that the output transistor has excessive load current. The result is that the output of the
E8CC is turned OFF This display flashes until the condition returns to normal Check the output
E8CC is turned OFF. This display flashes until the condition returns to normal. Check the output
wiring if this display flashes.
Indicates that the Pressure Sensor element is damaged due to the imposition of excessive pressure
or for other reasons in which case the output of the E8CC turns OFF If this display appears the
or for other reasons, in which case the output of the E8CC turns OFF. If this display appears, the
E8CC can no longer be used.
Screwdriver
8
3. Set the mode selector to RUN.
The E8CC has normal output in the SET mode. Changing the
pressure setting is possible in RUN mode by turning the pressure
adjuster. Do not turn the pressure adjuster after it has been set to
the desired pressure.
Permissible range
Positive pressure
E8CC-A01C
0 to 98 kPa
(0 to 14.2 psi)
E8CC-B10C
0 to 980 kPa
(0 to 142.1 psi)
Negative pressure
E8CC-AN0C
0 to - - 101 kPa
(0 to - - 14.6 psi)
---
0 to - - 101 kPa
(0 to - - 14.6 psi)
E8CB/E8CC