P7SA-10F Omron, P7SA-10F Datasheet - Page 6

• Manufacturer Part Number: P7SA-10F
• Description: Contact OSTI For Purchase
• Manufacturer: Omron
• Series: G7SAr
• Type: Socketr

Specifications of P7SA-10F

• Number Of Positions: 10
• Mounting Type: DIN Rail
• Termination Style: Screw Terminal
• Associated Relay Series: G7SA
• Number Of Poles: 4
• Accessory Type: Sockets
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: G7SA Series
• For Use With: Z2943 - RELAY SAFETY PCB 3PST-NO/1NC 24V
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: P7SA10F; Z2947

Safety Precautions
Refer to the “Precautions for All Relays” on page I-9 and “Precautions for All Relays with Forcibly Guided Contacts” on page G-2.
■ Precautions for Correct Use
Do not touch the terminal area of the Relays or the socket terminal
area (charged area) while power is ON. Electric shock will result.
Wiring
Use one of the following wires to connect to the P7SA-10F/10F-ND/
14F/14F-ND.
Tighten each screw of the P7SA-10F/10F-ND/14F/14F-ND to a
torque of 0.98 N·m securely.
Wire the terminals correctly with no mistakes in coil polarity,
otherwise the G7SA will not operate.
Cleaning
The G7SA is not of enclosed construction. Therefore, do not wash
the G7SA with water or detergent.
■ Forcibly Guided Contacts
If an NO contact becomes welded, all NC contacts will maintain a
minimum distance of 0.5 mm when the coil is not energized. Likewise
if an NC contact becomes welded, all NO contacts will maintain a
minimum distance of 0.5 mm when the coil is energized.
Cat. No. J120-E1-03
Stranded wire: 0.75 to 1.5 mm
Solid wire:
(from EN50205)
1.0 to 1.5 mm
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
!CAUTION
2
2
In the interest of product improvement, specifications are subject to change without notice.
Relays with Forcibly Guided Contacts
G7SA
G-9