XS2R-D426-1 Omron, XS2R-D426-1 Datasheet - Page 18

• Manufacturer Part Number: XS2R-D426-1
• Description: I/O Connctr W/Y-joint Plg/Sckt
• Manufacturer: Omron

Specifications of XS2R-D426-1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Precautions
Refer to Correct Use for precautions for individual products.
Correct Use
Connections
• The XS3 and XS2 Sensor I/O Connectors cannot be connected to
• When using Sensors with Connectors or Limit Switches, use the
• Do not connect M8 screw models and S8 snap-in models together,
Connector Connection and Disconnection
• Before connecting or disconnecting Connectors, make sure that no
• When connecting or disconnecting Connectors, be sure to hold the
• Do not touch the engagement side of any Connector with wet
• Make sure that engagement side of any Connector is free of metal
• Do not use pliers to tighten mounting the thread bracket, otherwise
• Fully insert S8 snap-in models until the Connectors are hidden by
A-18
each other.
Sensor I/O Connectors specified in the catalog.
otherwise the proper degree of protection of the Connectors will not
be maintained.
power is being supplied to the Connectors.
Connectors by hand.
hands. If there is any water on the Connector or near the Connec-
tor, be sure to wipe off the water before connecting or disconnect-
ing the Connector, otherwise the Connector may short-circuit
internally or not ensure good insulation.
dust or power.
the thread bracket may be damaged. Be sure to tighten each
thread bracket by hand within a torque of 0.3 and 0.4 N·m. If the
thread bracket is not tightened securely, the Connector may not
maintain its proper degree of protection or the thread bracket may
fall off due to vibration.
the metal casing of the opposite parts, otherwise the Connectors
will not maintain their proper degree of protection or the thread
brackets may drop off due to vibration.
Cable Wire Color
• The M8/S8 Sensor I/O Connectors use the following lead wire col-
Degree of Protection
• Do not impose external force continuously on the joints of pin
• Connectors are not fully watertight. Do not use them underwater.
• The Connectors are not oil-resistant. Do not use them where they
• If Connectors are used in places with vibration or shock, secure the
• Connectors are of resin mold construction. Do not impose exces-
Storage
Do not store Connectors for long periods of time in the following
locations
• Locations subject to dust or high humidity
• Locations subject to ammonia gas or sulfide gas
DC
ors.
blocks and covers, otherwise the Connectors may not keep its
proper degree of protection (i.e., IP67).
would be subject to oil.
engaged side of each Connector, otherwise the Connectors may
be disconnected or fail to maintain their proper degree of protec-
tion.
sive force on them.
Model
8-mm-dia.
DC4
Standard Photoelectric Sensors
Brown
1
White
2
Pin No.
Blue
3
Black
4