350981-2 TE Connectivity, 350981-2 Datasheet - Page 45
![RING 18-14 6TO10 STUD 016PTBR](/photos/30/94/309465/prring_001_l_sml.jpg)
350981-2
Manufacturer Part Number
350981-2
Description
RING 18-14 6TO10 STUD 016PTBR
Manufacturer
TE Connectivity
Type
Ring Tongue Terminalr
Datasheet
1.350981-2.pdf
(76 pages)
Specifications of 350981-2
Wire Gauge
14-18
Body Plating
Pre-Tin
Body Material
Brass
Insulation
Non-Insulated
Product Depth (mm)
7.62mm
Product Length (mm)
19.18mm
Color
Not Required
Rohs Compliant
YES
Terminal Shape
Ring Tongue
Receptacle Style
Straight
Barrel Type
Open Barrel
Wire/cable Type
Regular Wire
Insulation Support
Insulation Support
Insulation Diameter (mm [in])
3.05-4.32 [.120-.170]
Stud Diameter (mm [in])
3.51 [0.138], 4.17 [0.164], 4.83 [0.191]
Stud Size
10, 6, 8
Shape
RING-014
Heavy Duty
No
Finish
Pre-Tin
Wire Range (mm [awg])
0.80-2.00² [18-14]
Stock Thickness (mm [in])
0.41 [0.016]
Government/industry Qualification
No
Rohs/elv Compliance
RoHS compliant, ELV compliant
Lead Free Solder Processes
Not relevant for lead free process
Rohs/elv Compliance History
Always was RoHS compliant
Packaging Method
Strip
Lead Free Status / RoHS Status
Compliant
General Application Guidelines
To assist you in obtaining the optimum AMPLIVAR splice
termination, the following guidelines are recommended:
1. All magnet wires must be
2. Wire barrels are
3. The ratio of magnet wire
4. The sum of the circular
5. The sum of the diameters
Technical Documents
Application Specifications describe requirements for using the
product in its intended application and or crimping information.
They are intended for the Packaging and Design Engineer and the
Machine Setup Person.
114-2002
114-2003
114-2005
Catalog 82227
Revised 8-04
www.tycoelectronics.com
placed in the bottom of
the wire barrel before
crimping. If lead wire is to
be crimped in the same
termination, it should be
placed on top of the
magnet wires.
designed to accept a
maximum of three
insulated magnet wires
plus stranded lead wires.
diameters crimped in any
wire barrel should not
exceed 2:1. This ratio is
approximately a range
from the largest to the
smallest magnet wire of
six sizes.
mil area (CMA) of the
magnet wires and any
lead wires should not
exceed the capacity of
the splice.
of the individual magnet
wires plus twice the
terminal stock thickness
must be equal to or less
than the crimp width.
AMPLIVAR
7-Serration
Pigtail Splices
AMPLIVAR
9-Serration
Pigtail Splices
AMPLIVAR
Subminiature
Thru Splices
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
AMPLIVAR Splices
6. Magnet wire of 26 AWG
7. Magnet wire of 20 AWG
8. When aluminum magnet
9. Consult Tyco Electronics
114-2006
114-2009
114-2016
[0.40 mm] or smaller
should be used with
7-serration splices having
“shallow serrations,” and
magnet wire of 28 AWG
[0.32 mm] or smaller
should be used with
9-serration splices having
“shallow serrations” (part
numbers identified with
asterisk [*] are in the
tabular data on the
following technical
pages).
[0.81 mm] or larger
having an insulation
thickness heavier than
“single film coated,”
should not be used with
splices having “shallow
serrations” (those part
numbers marked with an
asterisk [*] in the tabular
data on the following
technical pages).
wire is used, splices and
terminals must be tin
plated.
for splice and terminal
selection and
recommendations for
all non-standard
applications.
AMPLIVAR
Subminiature
Pigtail Splices
AMPLIVAR
5-Serration
Thru Splices
AMPLIVAR
Miniature
Pigtail Splices
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
(Continued)
Suggested Splice Selection Procedure
Use the following guide to help you to determine the proper
splice for your application:
1. Use 9-serration splices,
2. Use 9-serration splices
3. Use splices identified
4. Calculate the total CMA
Example:
I
I
I
I
I
Selection of a Pigtail Splice to terminate the following wires:
One 28 AWG [0.32 mm] copper magnet wire.
One 22 AWG [0.64 mm] aluminum magnet wire.
One 18 AWG [0.8–0.9 mm
Calculate the total CMA (Procedure 4):
28 AWG [0.32 mm] coated magnet wire
22 AWG [0.64 mm] coated magnet wire
18 AWG [0.8–0.9 mm
Total
Calculate the sum of the magnet wire diameters (Procedure 5):
28 AWG [0.32 mm] coated magnet wire
22 AWG [0.64 mm] coated magnet wire
Total
Select a terminal for trial calculations. Splice No. 62305-2,
page 46 (Procedure 6):
CMA range
Stock thickness
Crimp width
Splice identified with asterisk [*] for 28 AWG [0.32 mm]
(Procedure 3).
Calculate the sum of the magnet wire diameters plus two splice
stock thicknesses (Procedure 7):
.0402 + (.016 x 2) = .0722
[1.02 + (0.41 x 2) = 1.84
.0722 [1.84] is less than the splice crimp width of .110 [2.79];
therefore, Part No. 62305-2 may be used.
9-serration, tin plated for aluminum magnet wire (Procedure 1).
tin plated when
terminating aluminum
magnet wire or
combinations with
aluminum magnet wire.
for hermetic and severe
environment applications.
with an asterisk [*] when
terminating 7-serration
26 AWG [0.40 mm]
or smaller wires and
9-serration 28 AWG [0.32
mm] or smaller wires.
of the magnet wires plus
any lead wires to be
terminated. Always use
the coated magnet wire
for CMA.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
2
] stranded lead wire
2
] 19-strand copper lead wire.
5. Calculate the total
6. Select a splice for trial
7. Calculate the sum of the
magnet wire diameters.
calculations. It should
have the proper CMA
range. Plating finish
should be considered at
this time.
magnet wire diameters
plus two splice stock
thicknesses. If this total is
less than the crimp width
of the splice selected, it
may be used. If the total
is greater than the crimp
width, a splice with a
greater crimp width must
be selected. Consult
Tyco Electronics for
special wide tooling
recommendations.
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
= 185 CMA
= 708 CMA
= 1608 CMA
= 2501 CMA
= .0136 [0.35]
= .0266 [0.68]
= .0402 [1.03]
= 600–3000
= .016 [0.41]
= .110 [2.79]
45