320571 TE Connectivity, 320571 Datasheet - Page 9

• Manufacturer Part Number: 320571
• Description: TERMINAL, RING TONGUE, 1/4IN, CRIMP, RED
• Manufacturer: TE Connectivity
• Type: Ring Tongue Terminalr
• Series: PIDGr

Specifications of 320571

• Wire Gauge: 16-22
• Body Plating: Tin
• Body Material: Copper
• Insulation: Nylon
• Product Depth (mm): 11.91mm
• Product Length (mm): 27.38mm
• Color: Red
• Connector Type: Ring Tongue
• Insulator Color: Red
• Termination Method: Crimp
• Stud/tab Size: 1/4"
• Wire Size (awg): 22-16
• Contact Material: Copper
• Contact Plating: Tin
• Rohs Compliant: Yes
• Angle: Straight
• Body Style: PIDG
• Brand/series: PIDG
• Cable Type: Regular Wire
• Diameter, Insulation: 0.125 "
• Diameter, Stud: 0.250 in.
• Finish: Tin
• Insulation Type: Nylon
• Length, Overall: 1.078 "
• Material, Contact: Copper
• Material, Insulation: Nylon
• Material, Terminal: Copper
• Primary Type: Ring
• Shape: RING-041
• Size, Stud: 1⁄4 "
• Standards: RoHS Compliant, ELV Compliant
• Termination: Wire
• Thickness, Material: 0.033 in.
• Voltage Range: 300 VAC
• Width, Overall: 0.469 "
• Wire Size: 22-16 AWG
• Product: Rings
• Stud / Tab Size: 1/4 (M6)
• Gender: Female
• Insulation Material: Nylon
• Voltage Rating: 300 VAC
• Terminal Shape: Ring Tongue
• Receptacle Style: Straight
• Barrel Type: Closed Barrel
• Wire/cable Type: Regular Wire
• Insulation Support: Insulation Support
• Insulation Diameter (mm [in]): 3.18 [.125] Max.
• Stud Diameter (mm [in]): 6.35 [0.250]
• Stud Size: 1/4 [M6]
• Heavy Duty: No
• Voltage (vac): 300
• Wire/cable Size (cma): 509 – 3,260
• Wire Range (mm [awg]): 0.30-1.40² [22-16]
• Tongue Material Thickness (mm [in]): 0.84 [0.033]
• Class: 1 & 2
• Government/industry Qualification: Yes
• Government/industry Part Number: MS25036-150
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Loose Piece
• Lead Free Status / RoHS Status: Compliant

3.7. Bend Allowance
Upward and downward bend of the terminated terminal, splice, or end cap must be within the tolerance
provided in Figure 9.
3.8. Repair
Damaged or defective terminal, splice, or end cap must not be used. If damage is evident, the terminal, splice,
or end cap should be cut from the wire and replaced with a new one. Crimped terminals, splices, or end caps
MUST NOT be re–terminated or re–used by removing the wire.
Datum Line
Datum Line
Datum Line
Rev D
(Sketches represent the uppermost wire insulation range of the Terminals, Splice, or End Cap. Thinner wire insulation
Detail A
11
11
Cross-Section of Insulation Crimp At Wire End of Terminals, Splice, or End Cap
Too Loose
may appear slightly different, but will perform the same.) Refer to Figure 2.
T erminal, Splice, or
End Cap Insulation
PIDG Terminals, Splices, and End Caps
Detail B
Center of Crimp
Center of Splice
Center of Crimp
Figure 8
Figure 9
Terminal
End Cap
Splice
Correct
Wire
Insulation
Metal
Sleeve
Detail C
11
11
Too Tight
11
11
11
11
114-2157
9 of 14