CS8427-CSZR Cirrus Logic Inc, CS8427-CSZR Datasheet - Page 14

• Manufacturer Part Number: CS8427-CSZR
• Description: Audio DSPs IC 96 kHz Digital Audio Transceiver
• Manufacturer: Cirrus Logic Inc

Specifications of CS8427-CSZR

• Operating Temperature Range: - 10 C to + 70 C
• Mounting Style: SMD/SMT
• Package / Case: SOIC-28
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

clock routing and the associated control register
bits. The clock routing constraints determine which
data routing options are actually usable. Users
should note that not all the possible data flow
switch setting combinations are valid, because of
the clock distribution architecture.
The AESBP switch, shown in
TTL level bi-phase, mark-encoded data stream
connected to RXP to be routed to the TXP and
TXN pin drivers. The TXOFF switch causes the
TXP and TXN outputs to be driven to ground.
There are two possible clock sources. The first,
designated the recovered clock, is the output of the
PLL, and is output through the RMCK pin. The in-
put to the PLL can be either the incoming AES3
data stream or the ILRCK word rate clock from the
serial audio input port. The second clock is input
through the OMCK pin and would normally be a
crystal derived stable clock. The Clock Source
Control Register bits determine which clock is used
to operate the CS8427.
The CS8427 has another constraint related to the
state machine that governs the startup of the part.
The startup state machine doesn’t complete its
14
Figure
7, allows a
process until the PLL has locked unless one is in
the transmitter dataflow (See
sequence of this is that the transmitter will not
transmit until the PLL has locked. If you wish to use
the part in transceiver mode and this constraint is
a problem, there is a work around. Start the part up
in its default configuration and allow the PLL to lock
to a signal on the ILRCK pin, then without stopping
the part, reconfigure it to the transceiver mode.
By studying the following drawings and appropri-
ately setting the Data Flow Control and Clock
Source Control register bits, the CS8427 can be
configured to fit a variety of customer require-
ments. Please note that applications implementing
both the Serial Audio Output Port and the AES3
Transmitter must operate at the same sample rate
because they are both controlled by the same
clock source.
Figure 9
PLL generated recovered clock.
trates a standard AES3 receiver function.
11
without PLL.
transmitter function with PLL.
shows a standard AES3 transmitter function
shows the entire data path clocked by the
Figure 12
shows a standard AES3
Figure
Figure 10
10). The con-
CS8427
DS477F5
Figure
illus-