MCP79401T-I/MS Microchip Technology, MCP79401T-I/MS Datasheet - Page 17

• Manufacturer Part Number: MCP79401T-I/MS
• Description: Real Time Clock I2C GP RTCC 64B SRAM EUI-48
• Manufacturer: Microchip Technology
• Series: -r
• Type: Clock/Calendarr

Specifications of MCP79401T-I/MS

• Features: Alarm, Leap Year, SRAM, Unique ID
• Memory Size: 64B
• Time Format: HH:MM:SS (12/24 hr)
• Date Format: YY-MM-DD-dd
• Interface: I²C
• Voltage - Supply: 1.8 V ~ 5.5 V
• Voltage - Supply, Battery: 1.3 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

5.2
5.2.1
Following the Start condition from the master, the
control code and the R/W bit (which is a logic low) are
clocked onto the bus by the master transmitter. This
indicates to the addressed slave receiver that a byte
with a word address will follow after it has generated an
Acknowledge bit during the ninth clock cycle.
Therefore, the next byte transmitted by the master is
the word address and will be written into the Address
Pointer of the MCP7940X. After receiving another
Acknowledge signal from the MCP7940X, the master
device transmits the data word to be written into the
addressed
acknowledges again and the master generates a Stop
condition. This initiates the internal write cycle, and,
during this time, the MCP7940X does not generate
Acknowledge signals for Unique ID Write commands. If
an attempt is made to write to an address and the
protection is set then the device will acknowledge the
command but no write cycle will occur, no data will be
written, and the device will immediately accept a new
command. After a Byte Write command, the internal
address counter will point to the address location
following the one that was just written.
 2011 Microchip Technology Inc.
Note:
ID
ID BYTE WRITE
Addressing undefined ID locations will
result in the MCP7940X not acknowledg-
ing the address.
memory
location.
The
MCP7940X
MCP7940X
DS25009A-page 17