DS1251YP-70IND Maxim Integrated Products, DS1251YP-70IND Datasheet - Page 6

• Manufacturer Part Number: DS1251YP-70IND
• Description: Real Time Clock
• Manufacturer: Maxim Integrated Products

Specifications of DS1251YP-70IND

• Function: Clock, Calendar, NV Timekeeping RAM
• Rtc Memory Size: 524288 B
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 4.5 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Rtc Bus Interface: Phantom Clock, Parallel
• Package / Case: PowerCap
• Time Format: HH:MM:SS:hh
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

DS1251/DS1251P
PHANTOM CLOCK REGISTER DEFINITION Figure 2
AM/PM/12/24 MODE
Bit 7 of the hours register is defined as the 12-hour or 24-hour mode-select bit. When high, the 12-hour
mode is selected. In the 12-hour mode, bit 5 is the AM/PM bit with logic high being PM. In the 24-hour
mode, bit 5 is the second 10-hour bit (20–23 hours).
OSCILLATOR AND RESET BITS
Bits 4 and 5 of the day register are used to control the
and oscillator functions. Bit 4 controls the
RST
(pin 1). When the
bit is set to logic 1, the
input pin is ignored. When the
bit is set to
RST
RST
RST
RST
logic 0, a low input on the
pin will cause the phantom clock to abort data transfer without changing
RST
data in the watch registers. Bit 5 controls the oscillator. When set to logic 1, the oscillator is off. When set
to logic 0, the oscillator turns on and the watch becomes operational. These bits are shipped from the
factory set to a logic 1.
ZERO BITS
Registers 1, 2, 3, 4, 5, and 6 contain one or more bits, which will always read logic 0. When writing these
locations, either a logic 1 or 0 is acceptable.
6 of 21