727 GREENLEE TEXTRON, 727 Datasheet - Page 23

• Manufacturer Part Number: 727
• Description: CUTTER, CABLE, 2/0AWG
• Manufacturer: GREENLEE TEXTRON

Specifications of 727

• Overall Length: 9.25"
• Handle Color: Green
• For Use With: Heavier Copper And Aluminum Cables
• Lead Free Status / RoHS Status: na

Gator
*CK1230 and CK1240 are UL and cUL classified with Anderson, Blackburn, FCI Burndy, ILSCO, Panduit, Penn-Union and Thomas & Betts copper and aluminum
color-coded lugs and splices when used with Greenlee KC12 and KA12 crimping dies. The products listed above are registered trademarks of Anderson
Blackburn
12-Ton Manual Hydraulic Crimping Tools
*HK1230 and HK1240 are UL and cUL classified with Anderson, Blackburn, FCI Burndy, ILSCO, Panduit, Penn-Union and Thomas & Betts copper and aluminum
color-coded lugs and splices when used with Greenlee KC12 and KA12 crimping dies. The products listed above are registered trademarks of Anderson
Blackburn
Crimping dies on page 215
CaT. nO.
CK123011
CK123022
CK124011
CK124022
01523
12274
spECiFiCaTiOns
Capacity
Crimping Force
Length
Weight
www.greenlee.com
= ReplacemenT paRT
®
®
, FCI Burndy
, FCI Burndy
®
*
Plus 12-Ton Corded Crimping Tools
upC nO. dEsCripTiOn
01370
01372
01373
01374
01523
12274
HK1230 & HK1240 –8 AWG to 750 kcmil copper
color-coded lugs and splices.
See crimping tool capacity chart on pg. 201;
24,000 lbs (106 kN)
HK1230 – 20-3/8" (518 mm);
HK1240 – 21-1/2" (546 mm);
HK1230 – 12.2 lbs (5.5 kg); HK1240 – 13.2 lbs (6.0 kg)
®
®
, ILSCO
, ILSCO
= accessoRy
®
®
, Panduit
, Panduit
Corded 12-Ton Crimping Tool, 1.2"
(30 mm) opening, 120V
Corded 12-Ton Crimping Tool, 1.2"
(30mm) opening, 230V
Corded 12-Ton Crimping Tool, 1.65"
(42 mm) opening, 120V
Corded 12-Ton Crimping Tool, 1.65"
(42 mm) opening, 230V
Carrying Case
Carrying Strap
®
®
, Penn-Union
, Penn-Union
®
®
HK1230
and Thomas & Betts
and Thomas & Betts
HK1240
HK1240C
®
®
.
.
• Operates directly from 120 volt 60 Hz or 230 volt 50 Hz electrical outlets.
• Equipped with 15 foot (5 m) cord. Can be used with extension cords.
• Two crimping head choices: CK1230 for industry “U” type dies with
• New head designs result in lower weight and improved durability –
• Two-speed pump to reduce cycle time.
• Ram automatically retracts when crimp cycle is complete – a Greenlee
• Retraction stop feature permits the operator to stop the ram retraction at
• Crimping heads rotate 360°.
• Includes carrying case.
• U.S. Patents #6,206,663 and #6,065,326.
• Two crimping head choices: HK1230 for Industry “U” type dies with 1.20"
• New head designs result in lower weight and improved durability –
• Two-speed pump to reduce cycle time.
• Ram automatically retracts when crimp cycle is complete
• Crimping heads rotate 360°.
• Smaller and lighter than competitive tools.
• Covered head models have two layers of PVC that total approximately
• Includes carrying case.
• U.S. Patent #6,206,663.
Crimping dies on page 219
CaT. nO.
spECiFiCaTiOns
Capacity
Crimping Force
Length
Weight
HK1230
HK1230C
HK1240
HK1240C
No need to charge batteries or worry about running out of power.
1.20" (30 mm) opening, and CK1240 for industry “U” type dies with
1.65" (42 mm) opening.
tested to 50,000 crimp cycles.
exclusive.
any point by pulling the trigger. The subsequent crimp cycle starts from
this partially retracted position saving time and battery life.
(30 mm) opening, and HK1240 for industry “U” type dies with 1.65"
(42 mm) opening.
tested to 50,000 crimp cycles.
– a Greenlee exclusive.
3/16" (4.8 mm) thick. The outer layer is black and the inner layer is red.
*
upC nO. dEsCripTiOn
06426
07199
06427
07202
CK1230 & CK1240 – 8 AWG to 750 kcmil copper
color-coded lugs and splices.
See Crimping Tool Capacity chart on page 201
for additional capabilities
24,000 lb (106 kN)
CK1230: 14-5/8" (371 mm); CK1240: 15-1/4" (387 mm)
CK1230: 14.1 lbs (6.4 kg); CK1240: 14.9 lbs (6.8 kg)
12-Ton Hydraulic Crimping Tool, 1.2" (30 mm) opening
12-Ton Hydraulic Crimping Tool, 1.2" (30 mm) opening,
PVC covered
12-Ton Hydraulic Crimping Tool, 1.65" (42 mm) opening
12-Ton Hydraulic Crimping Tool, 1.65" (42 mm) opening,
PVC covered
®
®
,
,
205