PCI-AC51 OPTO 22, PCI-AC51 Datasheet - Page 22

• Manufacturer Part Number: PCI-AC51
• Description: Computers, Interface Cards
• Manufacturer: OPTO 22

Specifications of PCI-AC51

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

ERROR CODES
18
PCI-AC51 User’s Guide
Decimal
Code
8204
8205
8206
8207
8384
8385
8386
8387
8388
8389
8390
0x200C
0x200D
0x200E
0x20C0
0x20C1
0x20C2
0x20C3
0x20C4
0x20C5
0x20C6
0x2010
Code
Hex
A closed handle tried to
be used
A handle number out of
range tried to be used
Specified device is
already open
Registry entry does not
exist.
Specified PCI board ID
was not found.
The device layer was not
found.
The device layer file ver-
sion is too old for the
toolkit.
OptoPM32 does not sup-
port this function.
The device layer could
not create a handle.
The requested PCI board
doesn’t exist, or the
device layer is improperly
configured.
The PCI board failed to
register with the PCI
BIOS.
Description
The handle that was sent to this function is closed. This
may represent corruption of the handle, failure to success-
fully open the handle, or a PamuxPCICardClose may have
been previously executed on this handle.
The handle submitted is invalid, as it is beyond the number
of handles the OptoPM32.DLL supports. Inspect the han-
dle for corruption. Also, validate that the handle number
does not change when PamuxPCICardOpen opens a valid
handle. It is also possible that an incorrect argument is
being passed to the function.
When inspecting the opening of a PCI-AC51, the handle’s
data structure is marked as open. The OptoPM32.DLL
does not support multiple access handles to individual
PCI-AC51s.
A historic WinRT error that doesn’t apply to the
OptoPM32.DLL.
The board ID is beyond the range of valid board ID num-
bers. The range is always from zero to one less than the
number of adapters installed in the computer.
The customer application is copied onto a system that
does not have the toolkit layer installed.
May happen if a toolkit with an older WinDriver version is
installed onto the system. Update all toolkit installations
with the latest toolkits.
An unsupported PCI-AC51 function is called from the appli-
cation. The PCI-AC51 does not support the identify type
and does not support a reset level function.
Another open is blocking the requested device. Call Prod-
uct Support if this error is detected.
With a DOS prompt box, try the command “wdreg install”. If
this command fails, reinstall the toolkit. Otherwise, call
Product Support.
Try on a system with a newer PCI-BIOS or see if the manu-
facturer has a PCI-BIOS or BIOS ugrade for the system.
Remedy