66102 EATON POWERWARE/MGE OFFICE PROTECTION, 66102 Datasheet - Page 11

• Manufacturer Part Number: 66102
• Description: Network Management Card
• Manufacturer: EATON POWERWARE/MGE OFFICE PROTECTION

Specifications of 66102

• For Use With: Central UPS Systems That Protect A Complete Network Or For UPS Systems Providing Back-up For Critical Equipment

Service port
LED
UPS
Data
RS232
2.1.3 Installation in the UPS
The Network Management Card (66102) can be "hot" installed in all UPSs of the MGE UPS SYSTEMS range equipped with a Minislot
without having to shut it down.
2.1.4 Sensor installation (option)
The Environment sensor is available as an option on the Network Management Card and is available from MGE UPS SYSTEMS (reference
66846).
The sensor allows remote monitoring of the UPS's environment through regular measurements: temperature, humidity, status of two external
contacts. It also enables notification of alarms (e-mail, trap SNMP) according to pre-programmed thresholds.
It is connected to the Service port (Settings/Sensor) directly on the Network Management Card with a standard Ethernet cable (20 meters
maximum).
Recognition is automatic. Supervision and configuration are performed via a menu that can be accessed directly from the home page.
T H E
Network Management Card – User Manual
Remove the protective plastic cover from the Minislot
Note the card's MAC address prior to insertion
Insert and tighten the card's retaining screws
Connect the ETHERNET cable
Wait 2 min.; the card is completely operational when the green UPS Data LED flashes continuously
Colour
Green
Orange
U N I N T E R R U P T I B L E
Activity
Off
On
Flashing
Off
On
Flashing
P O W E R
34003991EN/GA
Description
Card startup in progress.
Communication with UPS in progress
Normal operation.
Communication with the UPS is
operational
Configuration menu is active
Normal
menu is deactived
Communication with the Environment
Sensor (option).
P R O V I D E R
operation.
Configuration
- 11 -