12211 Simpson, 12211 Datasheet - Page 11

• Manufacturer Part Number: 12211
• Description: MULTIMETER, ANALOG, 7 FUNCTIONS
• Manufacturer: Simpson

Specifications of 12211

• Voltage Measuring Range Dc: 250mV To 1000V
• Voltage Measuring Range Ac: 2.5V To 1000V
• Current Measuring Range Dc: 50µA To 5A
• Current Measuring Range Ac: 250A
• Range Selection: Manual
• Accuracy: +/- 2 %
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.
This section contains information and instructions for the installation and shipping
of the Instrument. Included are unpacking and inspection procedures, shipping,
power source requirements and operating position.
2.1
Examine the shipping carton for damage. Inspect the Instrument and packing
material for damage from mechanical shock, water leakage, or other causes. Check
the electrical performance as soon as possible. If there is any indication of dam-
age, file a complaint with the carrier immediately. Also check that all accessories
are included (Table 1-2). Save the shipping carton and packing materials for fu-
ture storing or shipping of the Instrument.
A 1.5V and a 9V battery is packed in separate envelopes inside the box with the
Instrument and test leads. Two alligator clips for the test leads are packed in a
polyethylene bag. A pair of test leads, one black and one red, are also included.
2.2
The Simpson Electric Company warranty policy is located on the inside front cover
of this manual. Read it carefully before requesting a warranty repair. For all assis-
tance, including help with the Instrument under warranty, contact the nearest Au-
thorized Service Center for instructions. If necessary, contact the factory directly
and give full details of the difficulty, including the instrument model number and
date of purchase. Service data or shipping instructions will be mailed promptly. If
an estimate of charges for non-warranty or other service work is required, a maxi-
mum charge estimate will be quoted. This charge will not be exceeded without
prior approval.
2.3
Pack the Instrument carefully and ship it prepaid to the proper destination. Insure
the Instrument.
2.4
Two batteries are in the ohmmeter circuits, a is a NEDA 13F, D size battery that
furnishes 1.5V for all ranges up to RX1K and a NEDA 1604A battery which fur-
nishes 9V for the RX10K range.
2.5
The Instrument may be set horizontally on its rubber feet or vertically on its back
and operated in either position. The Instrument can also be set at an inclined
angle by positioning a stand under the unit.
2.6
a.
INSTALLATION
Immediately clean all spilled materials from the Instrument and wipe dry. If
the spillage is corrosive, use a suitable cleaner to neutralize the corrosive
action, and remove the spillage.
Unpacking and Inspection
Warranty
Shipping
Power Source Requirements
Operating Positions
Care
11