9005A JEWELL / MODUTEC, 9005A Datasheet - Page 7
![MULTIMETER DIGITAL HANDHELD, 3-1/2 DIGIT](/photos/27/66/276671/4151371_sml.jpg)
9005A
Manufacturer Part Number
9005A
Description
MULTIMETER DIGITAL HANDHELD, 3-1/2 DIGIT
Manufacturer
JEWELL / MODUTEC
Datasheet
1.9005A.pdf
(25 pages)
Specifications of 9005A
Dmm Type
Handheld
Voltage Measuring Range Dc
1000
Voltage Measuring Range Ac
750
Current Measuring Range Dc
20µA To 10A
Current Measuring Range Ac
200µA To 10A
Lead Free Status / RoHS Status
na
2.42 Avoid usage near strong magnetic fields (magnets, loudspeakers,
2.43 Avoid usage near strong electrostatic fields (high voltage power lines,
2.44 Avoid usage near strong RF fields (radio or television transmitters, walkie
2.45 Remove the battery when the meter may be left unused for longer than 1
2.46 Do not use the meter if there is evidence of chemical leakage from the
2.47 Observe whether HOLD function is activated. The meter may not show the
2.48 Do not attempt to measure the hFE of a transistor with the meter’s test leads
low voltage when high voltages are actually present. Failure to observe this
transformers, motors, coils, relays, contactors, electromagnets, etc.).
The meter may display readings that are in error, causing the user to
misinterpret the hazards present. For example, the meter may indicate a
precaution may result in damage to the meter or injury to the user.
televisions, computer monitors, etc.). The meter may display readings that
are in error, causing the user to misinterpret the hazards present. For
example, the meter may indicate a low voltage when high voltages are
actually present. Failure to observe this precaution may result in damage
to the meter or injury to the user.
talkies, cellular phones, etc.). The meter may display readings that are in
error, causing the user to misinterpret the hazards present. For example,
the meter may indicate a low voltage when high voltages are actually
present. Failure to observe this precaution may result in damage to
the meter or injury to the user.
month. Chemical leakage from the battery could damage the meter,
leading to user injury.
battery. Leakage could damage meter and lead to injury of user.
presence of dangerous potentials when HOLD is activated. For example,
if HOLD is applied when the meter is reading zero, and 120VAC is
subsequently applied, the meter will continue to read zero. Failure to
observe this precaution may result in damage to the meter or injury to
the user.
connected. Failure to observe this precaution may result in injury to
the user.
6