E4407B STD AGILENT TECHNOLOGIES, E4407B STD Datasheet - Page 11

• Manufacturer Part Number: E4407B STD
• Description: ANALYZER, SPECTRUM, 9KHZ To 26.5GHZ
• Manufacturer: AGILENT TECHNOLOGIES

Specifications of E4407B STD

• Spectrum Analyzer Type: Bench
• Frequency Measuring Range: 9kHz To 26.5GHz
• Sensitivity Dbm: -139dBm
• External Height: 222mm
• External Width: 416mm
• External Depth: 409mm
• Weight: 37.7lb
• Lead Free Status / RoHS Status: na

Figure 2. Specified dynamic range for E4407B spectrum analyzer
Amplitude Specifications
Second harmonic distortion
WCDMA ACPR dynamic range b
Other input related spurious
Residual responses ( Input terminated and 0 dB attenuation)
Spurious responses
Third order intermodulation distortion
10 MHz to 100 MHz
100 MHz to 3 GHz
3.0 GHz to 6.7 GHz
6.7 GHz to 13.2 GHz
13.2 GHz to 26.5 GHz
75 Ω RF input impedance
available on ESA-L Custom Configuration for the E4411B)
2 MHz to 750 MHz
- 40 dBm tone at input mixer a
10 MHz to 500 MHz
- 30 dBm tone at input mixer a
500 MHz to 1.5 GHz
- 30 dBm tone at input mixer a
1.5 GHz to 2.0 GHz
- 10 dBm tone at input mixer a
- 10 dBm tone at input mixer a
Offset frequency
5 MHz
10 MHz
Inband > 30 kHz offset
Out of band responses
50 Ω RF input impedance
> 2 GHz
150 kHz to 1.5 GHz/6.7 GHz c
1 MHz to 1.5 GHz
(Option 1DP only
< -75 dBc, + 35 dBm SHI (E4411B)
< -75 dBc, + 7.5 dBm TOI
For two -30 dBm signals at input mixer a and > 50 kHz separation
< -60 dBc, + 30 dBm SHI
< -70 dBc, + 40 dBm SHI
< -80 dBc, + 70 dBm SHI
≤ -95 dBc, + 85 dBm TOI
E4411B/03B/08B
Basic analyzer
N/A
N/A
< -65 dBc for -20 dBm tone at input mixer a
< -80 dBc -10 dBm tone at input mixer a
< -90 dBm
< -36 dBmV
Input terminated and 0 dB attenuation
a.
b.
c.
Mixer power level (dBm) = input power (dBm) - input attenuation (dB).
Characteristic. Measured by selecting “Measure, ACP”, 20 to 30 °C, 3GPP
(3.1 Dec 1999) W-CDMA signal with 1 DPCH, channel power -9 dBm/3.84 MHz,
integration bandwidth 3.84 MHz, carrier frequency 2 GHz, reference level
-16 dBm, input attenuation 0 dB, RBW 30 kHz. Noise correction can be turned on
by selecting Meas Setup, More, Noise Corr On.
Up to 1.5 GHz for models E4402B/03B/11B. Up to 6.7 GHz for models
E4404B/05B/07B/08B.
< -85 dBc, +12.5 dBm; typ +16 dBm TOI
< -82 dBc, +11 dBm; typ +18 dBm TOI
< -75 dBc, +7.5 dBm; typ +12 dBm TOI
< -75 dBc, +7.5 dBm; typ +11 dBm TOI
customer configuration E4402B/04B/05B/07B
-64.5 dBc, -65.5 dBc(Opt 120), -67 dBc
Standard, communications test analyzer or
-60 dBc, -65 dBc (Opt 120), -66.5 dBc
< -65 dBc, + 35 dBm SHI
< -75 dBc, + 45 dBm SHI
< -85 dBc, + 75 dBm SHI
< -100 dBc, + 90 dBm SHI
+7 dBm, characteristic
noise correction on
noise correction on
11