N2796A AGILENT TECHNOLOGIES, N2796A Datasheet - Page 2

• Manufacturer Part Number: N2796A
• Description: TEST PROBE, OSCILLOSCOPE, 10:1, 2GHZ
• Manufacturer: AGILENT TECHNOLOGIES

Specifications of N2796A

• Test Probe Type: Oscilloscope
• Test Probe Functions: Multi-function
• Features: Single-Ended, Active, Built-in Headlight
• Bandwidth: 2GHz
• Cable Length: 1.3m
• Rohs Compliant: NA
• For Use With: InfiniiVision / Infiniium Oscilloscopes
• Lead Free Status / RoHS Status: na

Characteristics
Use flex nose clip adapters with the dual lead adapter to obtain
access to IC leads or head connectors.
* denotes warranted electrical specifications after 20 minute warm-up, all others are typical
Probe Bandwidth* (-3db)
Risetime (calculated,
10-90%)
System Bandwidth
(with Agilent
oscilloscope)
Attenuation Ratio (@DC)
Input Dynamic Range
Non-destructive Max
Input Voltage
Offset range
DC Offset Error (Output
Zero)
Flatness
Input Resistance*
Input Capacitance
Probe Noise
Output Impedance
Internal Power
Cable length
Probe Weight
Ambient Operating
Temperature
Ambient Non-operating
Temperature
Operating Humidity
500/600 MHz (with
Agilent’s 500/600
MHz InfiniiVision/
Infiniium oscilloscope)
Typical 0.4 dB (100 kHz - 100 MHz)
Typical 0.6 dB (100 MHz - 500 MHz)
Typical 0.8 dB (500 MHz - 1 GHz)
Typical 1.3 dB (1 GHz - 2 GHz)
Agilent Autoprobe Interface from scope
N2795A
350 psec
1 GHz
±8 V
-8 V to +8 V (DC or peak AC)
<1mVrms (referred to input)
(InfiniiVision and Infiniium)
95% RH @ 40 deg C
-40 to 70 deg C
-20 V to +20 V
Approx. 100 g
0 to 50 deg C
10:1 ± 0.5%
< ±1 mV
1 MΩ
1.3 m
50 Ω
1 pF
1 GHz (with Agilent’s
1 GHz InfiniiVision/
Infiniium
oscilloscope)
N2796A
175 psec
2 GHz
±12 V
2
Non-operating Humidity
Operating Altitude
ESD
Standard Accessories
Others (included)
Standard Warranty
Compatible Agilent
scopes
Model number
N2795A
N2796A
The dual lead adapter allows you to easily connect the probe to a
popular 0.1” pin header with 0.025” square pins.
Description
1 GHz single-ended active probe
2 GHz single-ended active probe
- 2 each spring probe tip
- 2 rigid probe tip
- 1 each flex nose clip adapter (red and black)
- 1 each copper pad, 10x
- 1 each Y-lead adapter, 10 cm
- 1 each right angle ground, 5 cm
- 1 each right angle ground, 10 cm
- 2 each ground blade
- 1 each offset ground
- 1 each flex ground
- 4 color coding rings (each yellow,
-1 each accessory card
1 year (extended warranty available at cost)
Agilent InfiniiVision 5000, 6000, 7000 (except
6000 100MHz) and Infiniium 9000, 90000,
90000 X-Series (with N5442A)
green, blue and purple)
N2795A
90% RH @ 65 deg C
8 kV HBM
4000 m
N2796A