88013K NEWPORT ELECTRONICS, 88013K Datasheet - Page 32

• Manufacturer Part Number: 88013K
• Description: Test Probe
• Manufacturer: NEWPORT ELECTRONICS

Specifications of 88013K

• Test Probe Functions: Temperature
• For Use With: OS530, OS520 Series Handheld Infrared Thermometer
• Lead Free Status / RoHS Status: na

ATC
2.3.8 Using Ambient Target Temperature Compensation
°F
(OS533, OS534, OS523, OS524)
Use the Ambient Target Temperature Compensation
(AMB)
of these conditions are required:
1.
2.
3.
4.
5.
6.
7.
To set and activate the Ambient Target Temperature
Compensation Mode:
• The target has a low emissivity.
• The ambient temperature around the target is much
Pull the trigger and press the
trigger. Set the emissivity to 1.0 (refer to Section 2.3.1).
Press and hold the
Mode (AVG) appears.
Slowly move the thermometer so that the line of sight
sweeps across the area surrounding the target. The
thermometer measures the temperature at each point on
the surrounding area.
Read the average temperature value from the upper
display and record it here __________.
Press and hold the
Temperature Display Mode (AMB) appears.
Set the AMB temperature found in Step 4 by pressing the
Press the
temperature compensation. The
on the display.
higher than the ambient temperature around the
infrared thermometer.
Display Mode when high accuracy readings under both
To disable this mode, press the
The
key or the
Using the Handheld Infrared Thermometer
icon disappears.
key to enable the ambient target
key.
NOTE
key until the Average Display
key until the Ambient
key to lock the
key again.
icon appears
2
2-17