EL-USB-CO LASCAR, EL-USB-CO Datasheet - Page 3

• Manufacturer Part Number: EL-USB-CO
• Description: Carbon Monoxide USB Datalogger
• Manufacturer: LASCAR

Specifications of EL-USB-CO

• Gas Detector Type: Single Gas
• No. Of Sensors: 1
• Operating Temperature Range: -10°C To +40°C
• Humidity Range: 15% To 90%
• Reading Capacity: 32510
• Sample Rate: Programmable
• Lead Free Status / RoHS Status: na

EL-USB-CO
EL-USB-CO
Carbon Monoxide (CO) Data Logger with USB Interface
Carbon Monoxide (CO) Data Logger with USB Interface
LED FLASHING MODES
EL-USB-CO features a red and a green LED.
By default hold is disabled. In this mode the red LED will no longer continue to Á ash after the logged reading has returned to normal
from an alarm condition.
Hold can be turned on via the control software. In this mode the red LED that indicates an alarm condition will continue to Á ash, even after
the logged reading has returned to normal. This feature ensures that the user is notiÀ ed that an alarm level has been exceeded, without the
need to download the data from the logger.
The LEDs on an EL-USB-CO will Á ash in one of the following ways, assuming hold of the warning threshold has been turned off in the
EL-WIN-USB control software:
AUDIBLE WARNING
The audible warning will sound once per second when the warning threshold has been exceeded. To disable the warning, remove the cap from
the data logger.
The audible warning will sound once every 60 seconds when there is a low battery condition. This indicates that the battery must be replaced.
SpeciÀ cations liable to change without prior warning
Red LED
Green LED
www.lascarelectronics.com
Green single Á ash (10 seconds)
The data logger is currently logging. No alarm.
Green single Á ash (20 seconds)
The data logger is currently logging. No alarm. However, the battery is low and should be replaced
before logging important data.
Green single Á ash (30 seconds)
The data logger is not currently logging, but is primed to start at a later date and time (delayed start).
Green double Á ash (20 seconds)
The data logger is full and has stopped logging. No alarm.
Red single Á ash (10 seconds)
The data logger is currently logging. Alarm.
Red/Green single Á ash (20 seconds)
The data logger is full and has stopped logging. Alarm.
No LEDs Á ash
The data logger is stopped, the battery is empty or there is no battery À tted.
Issue 9
10/09
S.C
Applies to EL-USB-CO/2
Page 3 of 5