2SK4078-ZK-AY Renesas Electronics America, 2SK4078-ZK-AY Datasheet - Page 9

• Manufacturer Part Number: 2SK4078-ZK-AY
• Description: MOSFET 40V N-CH MP-3Z/TO-252
• Manufacturer: Renesas Electronics America

Specifications of 2SK4078-ZK-AY

• Fet Type: MOSFET N-Channel, Metal Oxide
• Fet Feature: Logic Level Gate
• Rds On (max) @ Id, Vgs: 8.5 mOhm @ 25A, 10V
• Drain To Source Voltage (vdss): 40V
• Current - Continuous Drain (id) @ 25° C: 50A
• Vgs(th) (max) @ Id: 2.5V @ 1mA
• Gate Charge (qg) @ Vgs: 45nC @ 10V
• Input Capacitance (ciss) @ Vds: 2300pF @ 10V
• Power - Max: 1W
• Mounting Type: Surface Mount
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

TAPE INFORMATION
MARKING INFORMATION
RECOMMENDED SOLDERING CONDITIONS
sales representative.
There are two types (-E1, -E2) of taping depending on the direction of the device.
The 2SK4078 should be soldered and mounted under the following recommended conditions.
Infrared reflow
Partial heating
For soldering methods and conditions other than those recommended below, please contact an NEC Electronics
For technical information, see the following website.
Semiconductor Device Mount Manual (http://www.necel.com/pkg/en/mount/index.html)
Soldering Method
Draw-out side
Maximum temperature (Package's surface temperature): 260 ° C or below
Time at maximum temperature: 10 seconds or less
Time of temperature higher than 220 ° C: 60 seconds or less
Preheating time at 160 to 180 ° C: 60 to 120 seconds
Maximum number of reflow processes: 3 times
Maximum chlorine content of rosin flux (percentage mass): 0.2% or less
Maximum temperature (Pin temperature): 350 ° C or below
Time (per side of the device): 3 seconds or less
Maximum chlorine content of rosin flux: 0.2% (wt.) or less
K4078
Data Sheet D18885EJ1V0DS
Soldering Conditions
Abbreviation of part number
Pb-free plating marking
Lot code
Reel side
Condition Symbol
Recommended
IR60-00-3
2SK4078
P350
7