LM193AH National Semiconductor, LM193AH Datasheet - Page 15

• Manufacturer Part Number: LM193AH
• Description: Comparator Dual ±18V/36V 8-Pin TO-99 Box
• Manufacturer: National Semiconductor

Specifications of LM193AH

• Package: 8TO-99
• Typical Response Time: 1.3 us
• Typical Response Time Range: 0.5 to 5 us
• Typical Voltage Gain Range: 90 to 110 dB
• Output Type: Open Collector
• Number Of Channels Per Chip: 2
• Minimum Single Supply Voltage: 2 V
• Power Supply Type: Single|Dual

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
Physical Dimensions
NOTE: UNLESS OTHERWISE SPECIFIED
1. EPOXY COATING
2. 63Sn/37Pb EUTECTIC BUMP
3. RECOMMEND NON-SOLDER MASK DEFINED LANDING PAD.
4. PIN A1 IS ESTABLISHED BY LOWER LEFT CORNER WITH RESPECT TO TEXT ORIENTATION REMAINING PINS ARE NUMBERED
COUNTERCLOCKWISE.
5. XXX IN DRAWING NUMBER REPRESENTS PACKAGE SIZE VARIATION WHERE X
PACKAGE HEIGHT.
6. REFERENCE JEDEC REGISTRATION MO-211, VARIATION BC.
www.national.com
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and
whose failure to perform when properly used in
accordance with instructions for use provided in the
labeling, can be reasonably expected to result in a
significant injury to the user.
National Semiconductor
Corporation
Americas
Email: [e-mail]
National Semiconductor
Europe
Deutsch Tel: [phone]
English
Français Tel: [phone]
inches (millimeters) unless otherwise noted (Continued)
X
1
Email: [e-mail]
= 1.514mm X
Fax: [phone]
Tel: [phone]
8-Bump (12 mil) micro SMD Package
NS Package TLA08AAA
2
= 1.514mm X
2. A critical component is any component of a life
1
support device or system whose failure to perform
can be reasonably expected to cause the failure of
the life support device or system, or to affect its
safety or effectiveness.
IS PACKAGE WIDTH, X
3
= 0.600mm
National Semiconductor
Asia Pacific Customer
Response Group
Tel: [phone]
Fax: [phone]
Email: [e-mail]
2
IS PACKAGE LENGTH AND X
National Semiconductor
Japan Ltd.
Tel: [phone]
Fax: [phone]
3
IS