HSMP-3820-BLKG Avago Technologies US Inc., HSMP-3820-BLKG Datasheet - Page 5

• Manufacturer Part Number: HSMP-3820-BLKG
• Description: DIODE PIN SWITCH 50V SOT-23
• Manufacturer: Avago Technologies US Inc.

Specifications of HSMP-3820-BLKG

• Diode Type: PIN - Single
• Voltage - Peak Reverse (max): 50V
• Current - Max: 1A
• Capacitance @ Vr, F: 0.8pF @ 20V, 1MHz
• Resistance @ If, F: 600 mOhm @ 10mA, 100MHz
• Package / Case: SOT-23-3, TO-236-3, Micro3™, SSD3, SST3
• Diode Case Style: SOT-23
• Series Resistance @ If: 0.6ohm
• Peak Reflow Compatible (260 C): Yes
• Capacitance Ct: 0.8pF
• Current Rating: 1A
• Leaded Process Compatible: Yes
• Mounting Type: Surface Mount
• Breakdown Voltage: 50V
• Rohs Compliant: Yes
• Capacitance: 0.80pF
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power Dissipation (max): -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 516-1904; HSMP-3820-BLKG

Typical Applications for HSMP-482x Low Inductance
Series
Microstrip Series Connection for HSMP-482x Series
In order to take full advantage of the low inductance
of the HSMP-482x series when using them in series
applications, both lead 1 and lead 2 should be connected
together, as shown in Figure 14.
Figure 13. Internal Connections.
Figure 13. Internal Connections.
Figure 14. Circuit Layout.
Figure 14. Circuit Layout.
Microstrip Shunt Connections for HSMP-482x Series
In Figure 15, the center conductor of the microstrip line
is interrupted and leads 1 and 2 of the HSMP-482x diode
are placed across the resulting gap. This forces the 0.5
nH lead inductance of leads 1 and 2 to appear as part of
a low pass filter, reducing the shunt parasitic inductance
and increasing the maximum available attenuation.
The 0.3 nH of shunt inductance external to the diode
is created by the via holes, and is a good estimate for
0.032" thick material.
Figure 15. Circuit Layout, HSMP-482x Limiter.
Figure 15. Circuit Layout,
HSMP-482x Limiter.
5
50 OHM MICROSTRIP LINES
1
HSMP-482x
PAD CONNECTED TO
GROUND BY TWO
3
VIA HOLES
2
Figure 16. Equivalent Circuit.
Figure 16. Equivalent Circuit.
Co-Planar Waveguide Shunt Connection for HSMP-482x Series
Co-Planar waveguide, with ground on the top side of
the printed circuit board, is shown in Figure 17. Since
it eliminates the need for via holes to ground, it offers
lower shunt parasitic inductance and higher maximum
attenuation when compared to a microstrip circuit. See
AN1050 for details.
Figure 17. Circuit Layout.
Figure 18. Equivalent Circuit.
Figure 18. Equivalent Circuit.
Figure 17. Circuit Layout.
1.5 nH
0.75 nH
0.3 nH
0.3 nH
0.8 pF
Co-Planar Waveguide
0.8 pF
Groundplane
Center Conductor
Groundplane
1.5 nH