C702G46100G2 Amphenol, C702G46100G2 Datasheet - Page 7

• Manufacturer Part Number: C702G46100G2
• Description: Connector Accessories Metal Bezel With Coin Spacer Silver
• Manufacturer: Amphenol
• Type: Bezelr

Contact Methods
Landing Contacts
With this contact method a moveable contact set will connect
with the pads of the chip card upon insertion of the card.
The card plastic surface is not scratched and highmating
cycles can be achieved.
Wiping Contacts
The contact set is fixed. When the card is inserted, it wipes
over the data contacts until they arrive at the card pads.
Depending upon the card surface, wiping traces which do not
influence the card function can occur after some insertion
cycles.
The advantage of wiping contacts is that they clean the
contact point with every mating cycle.
Landing Card
This method of contacting is based on a fixed contact set.
The chip card is lowered during its insertion.
The contact areas of the chip card land smoothly on the
reading contacts which results in the possibility of a high
number of mating cycles. In addition this system makes sure
that with each insertion the contact surfaces are cleaned.
®
SIMLOCK
In cases where chip cards with the dimensions of a full size
®
ISO 7816 are too large, the SIMLOCK
comes into use. With
its latching cover for the insertion of the smaller SIM card it
offers a safe contact interface even in mobile usage.
Due to the locking system the user does not have to consider
tolerances or card guiding.
The design and packaging of the Amphenol SIMLOCK
®
allows manual and automatic pick and placement prior to
surface mount soldering.
SIMBLOCK
®
These Smart Card Connectors, due to their minimal space
requirement and low height are the ideal components for
many space restricted applications, from handsets to the
electronic purse. The connector is suitable for standard chip
cards per ISO 7816 as well as for plug-in SIM cards.
The SMT terminals and packaging for automatic handling
allow the use of pick and place robots and modern surface
solder technologies. Positioning and support of the chip card
has to be ensured by the user.
7