S2008VTP Littelfuse / Teccor Brand Thyristors, S2008VTP Datasheet - Page 7
![SCR NON-SENS 200V 8A TO-251](/photos/5/60/56062/dpak_369d___01_sml.jpg)
S2008VTP
Manufacturer Part Number
S2008VTP
Description
SCR NON-SENS 200V 8A TO-251
Manufacturer
Littelfuse / Teccor Brand Thyristors
Specifications of S2008VTP
Scr Type
Standard Recovery
Voltage - Off State
200V
Voltage - Gate Trigger (vgt) (max)
1.5V
Voltage - On State (vtm) (max)
1.6V
Current - On State (it (av)) (max)
5.1A
Current - On State (it (rms)) (max)
8A
Current - Gate Trigger (igt) (max)
15mA
Current - Hold (ih) (max)
30mA
Current - Off State (max)
10µA
Current - Non Rep. Surge 50, 60hz (itsm)
83A, 100A
Operating Temperature
-40°C ~ 125°C
Mounting Type
Through Hole
Package / Case
IPak, TO-251, DPak, VPak (3 straight leads + tab)
Current - On State (it (rms) (max)
8A
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
©2010 Littelfuse, Inc
Soldering Parameters
Reflow Condition
Pre Heat
Average ramp up rate (Liquidus Temp)
(T
T
Reflow
Peak Temperature (T
Time within 5°C of actual peak
Temperature (t
Ramp-down Rate
Time 25°C to peak Temperature (T
Do not exceed
Physical Specifications
Terminal Finish
Body Material
Lead Material
Design Considerations
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
S(max)
L
) to peak
to T
L
- Ramp-up Rate
- Temperature Min (T
- Temperature Max (T
- Time (min to max) (t
- Temperature (T
- Temperature (t
p
)
P
)
100% Matte Tin-plated
classification 94V-0
Copper Alloy
L
L
)
) (Liquidus)
s(min)
s(max)
s
)
P
)
)
)
150°C
200°C
5°C/second max
5°C/second max
217°C
260
5°C/second max
8 minutes Max.
280°C
Teccor
8 Amp Sensitive & Standard SCRs
+0/-5
°C
®
Revised: July 29, 2010 09:54 AM
brand Thyristors
235
AC Blocking
Temperature Cycling
Temperature/
Humidity
High Temp Storage
Low-Temp Storage
Thermal Shock
Autoclave
Resistance to
Solder Heat
Solderability
Lead Bend
Environmental Specifications
T
T
S(max)
S(min)
25
T
T
Test
P
L
time to peak temperature
t
MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage @ 125°C for 1008 hours
MIL-STD-750, M-1051,
100 cycles; -40°C to +150°C; 15-min
dwell-time
EIA / JEDEC, JESD22-A101
1008 hours; 320V - DC: 85°C; 85%
rel humidity
MIL-STD-750, M-1031,
1008 hours; 150°C
1008 hours; -40°C
MIL-STD-750, M-1056
10 cycles; 0°C to 100°C; 5-min dwell-
time at each temperature; 10 sec (max)
transfer time between temperature
EIA / JEDEC, JESD22-A102
168 hours (121°C at 2 ATMs) and
MIL-STD-750 Method 2031
ANSI/J-STD-002, category 3, Test A
MIL-STD-750, M-2036 Cond E
S
Preheat
Preheat
Specifications and Conditions
Ramp-up
Ramp-up
Sxx08xSx & Sxx08x Series
t
t
P
L
Ramp-down
Ramp-do
Time