2-1871566-2 Tyco Electronics, 2-1871566-2 Datasheet - Page 53

• Manufacturer Part Number: 2-1871566-2
• Description: Conn Fine Pitch Connector PL 22 POS 0.4mm Solder ST SMD T/R
• Manufacturer: Tyco Electronics
• Type: Fine Pitch Connectorr

Specifications of 2-1871566-2

• Pitch: 0.4 mm
• Number Of Rows: 2
• Number Of Contacts: 22
• Gender: PL
• Contact Plating: Gold
• Termination Method: Solder

Elastiboot™ Connectors
for Microphones
Features
• Boot and STAX elastomeric
• Elastiboot allows microphone
• Large deflection range of
• Standard Elastiboots available
• Elastiboot uses reliable,
• Custom, application specific
Physical Properties
Height:
See chart
Minimum Pad Pitch:
See PCB drawings
STAX Conductor Width:
0.064 mm (.0025″)
STAX Conductor Pitch:
0.127 mm (.005″)
Environmental Parameters
Operating Temperature:
–40 ºC to +125 ºC
Moisture:
0 to 100% RH
Test Report:
TR 341
connector are together as one
inseparable piece.
to be provided as an assembly
complete with acoustic boot
and STAX compression-style
connector.
5 thru 50%.
for smaller industry-standard
leadless microphones of 4.0
and 6.0 mm diameter.
superior performing Tyco
Electronics STAX elastomeric
compression connectors.
designs can be created.
Part Number
2-1442003-2
6-1442001-3
9-1442002-7
5-1442003-9
1-1442002-5
9-1442000-8
8-1442001-6
6-1442001-0
Outer Diameter/
Microphone
Thickness
4.0 / 1.0
4.0 / 1.85
6.0 / 1.0
6.0 / 1.0
6.0 / 1.3
6.0 / 1.5
6.0 / 2.2
6.0 / 2.2
(mm)
Products for Mobile Equipment
Connectors
Elastiboot™ Connectors for Microphones
The Tyco Electronics line of Elastiboot connectors combines an elastomeric connector with an
acoustic grommet or “boot” for industry standard 4.0 and 6.0 mm diameter leadless microphones.
In a continued effort to lower the cost of hand-held electronic devices, high volume manufacturers
are looking for value added sub-assemblies from their component suppliers.
Elastiboot connectors from the Tyco Electronics Elastomeric Technologies product line fill this
need by providing ease of assembly in connecting small form-factor microphones to host PCBs.
Elastiboots combine the connector with the acoustic grommet (or “boot”) to create a one-piece,
orientation free subassembly.
Elastiboot connectors make assembly of microphones into portable electronic devices economical
and robust.
■
■
■
■
■
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Microphone is placed into
Elastiboot connector.
Elastiboot/Microphone as-
sembly is placed in cavity in
front housing of mobile unit.
Makes blind-mate connec-
tion to concentric-ring pads
on PC Board during final
assembly of unit.
Concentric-ring pad layouts
allow for orientation-free
assembly.
Elastiboot connector cap-
tures microphone while
providing electrical connec-
tion and acoustic sealing.
STAX Type
Gold
SD
SD
LD
LD
LD
LD
LD
Seal Ribs
Yes
Yes
Yes
Yes
Yes
Yes
No
No
4.0 mm Diameter Microphone
Elastiboot with Seal Ribs
Typical PCB Pattern for
Diameter
5.17
5.12
7.37
7.37
7.50
7.50
7.30
7.50
Dimensions for Cavity in Host (above)
Max. Cavity Depth
(mm)
1.60
2.60
1.35
1.35
1.70
2.26
2.30
2.30
6.0 mm Diameter Microphone
Elastiboot without Seal Ribs
Typical PCB Pattern for
Catalog 1654270-2
Mated Height
Revised 8-2007
5.26
5.37
7.46
7.46
7.65
7.66
7.44
7.50
51