890-70-036-10-002101 Precidip, 890-70-036-10-002101 Datasheet - Page 4

• Manufacturer Part Number: 890-70-036-10-002101
• Description: Conn Unshrouded Header HDR 36 POS 2.54mm Solder ST Thru-Hole
• Manufacturer: Precidip
• Type: Unshrouded Headerr

Specifications of 890-70-036-10-002101

• Pitch: 2.54 mm
• Number Of Contacts: 36
• Gender: HDR
• Termination Method: Solder

WWW.PRECIDIP.COM
The values listed below are general specs applying for PreCi-DiP socket and pin connectors. Please see individual catalog page for additional and
product specific technical data.
OPERATInG TEMPERATuRE RAnGE
CLIMATIC CATEGORy (IEC)
OPERATInG huMIDIT y RAnGE
MA x. WORkInG vOLTAGE
MEChAnICAL ChARACTERISTICS
CLIP RETEnTIOn
COnTACT (SLEEvE / CLIP) RETEnTIOn
ELECTRICAL ChARACTERISTICS
InSuL ATIOn RESISTAnCE BETWEEn Any TWO ADJACEnT COnTACTS
CAPACITAnCE BETWEEn Any TWO ADJACEnT COnTACTS
AIR AnD CREEPAGE DISTAnCES BETWEEn Any TWO ADJACEnT COnTACTS
SeRie
mm
EnvIROnMEnTAL ChARACTERISTICS
The sockets withstand the following environmental tests without mechanical
and electrical defects:
• Dry heat steady state ieC 60512-11-9.11i / 60068-2-2.Bb: 125 °C, 16 h
• Damp heat cyclic ieC 60512-11-12.11m / 60068-2-30.Db: 25/55 °C, 90 – 100 %rH,
• Cold steady state ieC 60512-11-10.11j / 60068-2-1.A: -55 °C, 2 h
• Thermal shock ieC 60512-11-4.11d / 60068-2-14.Na: -55/125 °C, 5 cycles 30 min.
• Sinusoidal vibrations ieC 60512-6-4.6d / 60068-2-6.Fc: 10 to 500 Hz, 10 g,
• Shock ieC 60512-6-3.6c / 60068-2-27.ea: 50 g, 11 ms, 3 shocks in three axis
During the above two tests, no contact interruption >50 ns does appear.
• Solderability J-STD-002A, Test A, 245 °C, 5 s, solder alloy SnAg3.8Cu0.7
• resistance to soldering heat J-STD-020C, 260 °C, 20 s
• Moisture sensitivity J-STD-020C level 1
• resistance to corrosion:
SOLDERLESS COMPLIAnT PRESS-fIT ChARACTERISTICS
PRESS-fIT ChARACTERISTICS MEASuRED ACC. TO IEC 60352-5
• Press-in force:
• Push-out force:
• Push-out 3 rd cycle:
PCB hOLE DIMEnSIOnS
• 2 mm grid
• 2.54 mm grid
PCB hOLE PL ATInG
PCB surface finish
• Tin
• Copper
• Gold over nickel
Due to technical progress, all information provided is subject to change without prior notice.
1 cycle of 24 h
1 octave/min., 10 cycles for each axis
U L
®
PreCi-DiP products are recognized by Underwriters laboratories inc. and listed under “Connectors for Use in Data, Signal, Control and
Power Applications“, File Nr. e174442.
3xx/4xx/7xx
0.7
1) Salt spray test ieC 60068-2-11.Ka: 48 h
2) Sulfur dioxide (So 2 ) test ieC 60068-2-42 Kc: 96 h at 25 ppm So 2 ,
3) Hydrogen sulfide (H 2 S) test ieC 60068-2-43 Kd: 96 h at 12 ppm H 2 S,
25 °C, 75 %rH
25 °C, 75 %rH
TEL [phone]
90 N max. (at min. hole dia.) / 65 N typ.
30 N min. (at max. hole dia.) / 50 N typ.
20 N min. (at max. hole dia.)
Finished hole Ø: 0.7 + 0.09/-0.06 mm
Drilled hole Ø: 0.8 ± 0.02 mm
Finished hole Ø: 1 + 0.09/-0.06 mm
Drilled hole Ø: 1.15 ± 0.02 mm
Hole plating
5-15 µm tin over min. 25 µm copper
min. 25 µm copper
0.05-0.2 µm gold over 2.5-5 µm nickel
over min. 25 µm copper
80x
0.85 / 0.7
Min. 40 N (no displacement under axial force applied)
Min. 3.3 N acc. to Mil-DTl-83734, pt 4.6.4.2
-55 ... +125 °C
55/125/21
Annual mean 75%
100 V
[e-mail]
rms
/150 V
83x
0.5
dc
(2.54 mm grid)
Min. 10’000 MΩ at 500 V
Max. 1 pF
85x
0.4 / 0.5
PCB COnnECTORS
GEnERAL SPECIfICATIOnS
86x
0.5
ac
PACkAGInG
• Standard connector packaging is card box.
• SMD mount connectors available on request
Please consult www.precidip.com for availability
size of tape, size of reel, number of components
per reel and packing units.
T & R Packaging
with Tape & reel packaging acc. to eiA Standard 481.
These products are marked with the symbol:
43