LM120H-5.0 National Semiconductor, LM120H-5.0 Datasheet - Page 13

• Manufacturer Part Number: LM120H-5.0
• Description: Standard Regulator Neg -5V 0.5A 3-Pin TO-39 Box
• Manufacturer: National Semiconductor
• Type: Linearr

Specifications of LM120H-5.0

• Package: 3TO-39
• Function: Standard
• Number Of Outputs: 1
• Input Voltage Range: -25 to -7 V
• Output Voltage: -5 V
• Maximum Output Current: 0.5 A
• Output Type: Fixed
• Accuracy: ±3 %
• Operating Temperature: -55 to 150 °C
• Polarity: Negative
• Voltage Regulator Type: Linear
• Topology: Standard
• Regulator Output Type: Fixed
• Polarity Type: Negative
• Input Voltage (min): -7V
• Input Voltage (max): -25V
• Package Type: TO-39
• Output Current: 500mA
• Power Dissipation: 2W
• Load Regulation: 50mV
• Line Regulation: 25mV
• Output Voltage Accuracy: ±3%
• Operating Temp Range: -55C to 150C
• Operating Temperature Classification: Military
• Pin Count: 3
• Mounting: Through Hole
• Quiescent Current (max): 2mA
• Lead Free Status / Rohs Status: Compliant

Typical Applications
High Stability 1 Amp Regulator
776706
Lead and line regulation — 0.01% temperature stability — 0.2%
†Determines Zener current.
††Solid tantalum.
An LM120-12 or LM120-15 may be used to permit higher input voltages, but the regulated output voltage must be at least −15V when using the LM120-12 and
−18V for the LM120-15.
**Select resistors to set output voltage. 2 ppm/°C tracking suggested.
Wide Range Tracking Regulator
776707
*Resistor tolerance of R1 and R2 determine matching of (+) and (−) inputs.
**Necessary only if raw supply capacitors are more than 3 from regulators
An LM3086N array may substitute for Q1, D1 and D2 for better stability and tracking. In the array diode transistors Q5 and Q4 (in parallel) make up D2; similarly,
Q1 and Q2 become D1 and Q3 replaces the 2N2222.
13
www.national.com