9-1393792-7 Tyco Electronics, 9-1393792-7 Datasheet - Page 468
9-1393792-7
Manufacturer Part Number
9-1393792-7
Description
Electromechanical Relay DPDT 3A 12VDC 720Ohm Through Hole
Manufacturer
Tyco Electronics
Type
Signal Relayr
Datasheet
1.1-1393793-9.pdf
(484 pages)
Specifications of 9-1393792-7
Contact Arrangement
DPDT
Dc Coil Voltage
12 V
Coil Current
16.67 mA
Mounting
Through Hole
- Current page: 468 of 484
- Download datasheet (15Mb)
1312
Ordering Information
Our authorized distributor is more likely to stock these items.
WD47 Specifications
Nominal Operating Range: 120 to 480 VAC.
Maximum Sensing Range: 575VAC.
Nominal Frequency Range: 40-400 Hz.
Contact Form:
Control Voltage:
WD47-001
WD47 Typical Hookup
WD47 Operation
WD47 phase sequence relays are designed to monitor the correct phase
rotation and loss of phase of three phase ac systems from 50 to 400 Hz. An
incorrect phase sequence or loss of any phase will cause the WD47 to pickup.
When the phase sequence is corrected or the lost phase is restored the
contacts dropout. Red LED's light to indicate a fault condition. A green LED
indicates power to the relay. The WD47 is often used to detect reverse phase
rotation or loss of phase to generators, busses, motors, and transformers.
Model WD47
Input Voltage (VDC)
Input Voltage (VAC)
Dimensions are shown for
reference purposes only.
1. Basic Series:
2. Type:
3. Control Voltage:
WD = DIN mount Protective Relay.
47= Phase Sequence Relay.
001 = 18 to 54VDC
002 = 13.5 to 32 VDC
003 = 100-200VDC or 100-140VAC.
Typical Part Number
2 form C (DPDT).
B
18 to 54
-001
–
Dimensions are in inches over
(millimeters) unless otherwise
specified.
13.5 to 32
WD
-002
–
47 -002
100 to 200
100 to 140
-003
Catalog 1308242
Issued 3-03
WD47 Phase Sequence Relays
• Function 47
• ANSI/IEEE C37.90-1978
WD47 Calibration
The WD47 has no adjustments and no calibration is necessary. Proper
operation may be verified as follows:
1.
2.
3.
WD47 Controls
WD47 Connections
Apply a nominal, three-phase input with the correct phase sequence.
The output relay should dropout and the green LED should light.
Apply a nominal, three-phase input with an incorrect phase sequence.
The output relay should pickup and the red LED should light.
Apply only one or two phases with the correct phase sequence. The
output relay should pickup and the red LED should light.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
KILOVAC
Related parts for 9-1393792-7
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
CRIMP, RECEPTACLE
Manufacturer:
TE Connectivity
Datasheet:
Part Number:
Description:
PIGGYBACK DISCONNECT, 6.35MM, CRIMP BLUE
Manufacturer:
TE Connectivity
Datasheet:
Part Number:
Description:
Manufacturer:
TE Connectivity
Datasheet:
Part Number:
Description:
CRIMP TERMINAL, FEMALE, BLUE
Manufacturer:
TE Connectivity
Datasheet:
Part Number:
Description:
Manufacturer:
TE Connectivity
Datasheet:
Part Number:
Description:
CONN HEADR BRKWAY .100 13POS R/A
Manufacturer:
Tyco Electronics
Datasheet:
Part Number:
Description:
CONN HEADR BRKWAY .100 13POS R/A
Manufacturer:
Tyco Electronics
Datasheet:
Part Number:
Description:
CONN HDR BRKWAY .100 13POS VERT
Manufacturer:
Tyco Electronics
Datasheet:
Part Number:
Description:
CONN HDR BRKWAY .100 13POS VERT
Manufacturer:
Tyco Electronics
Datasheet:
Part Number:
Description:
CONN HDR BRKWAY .100 13POS VERT
Manufacturer:
Tyco Electronics
Datasheet:
Part Number:
Description:
CONN HEADR BRKWAY .100 13POS R/A
Manufacturer:
Tyco Electronics
Datasheet:
Part Number:
Description:
CONN HEADR BRKWAY .100 13POS STR
Manufacturer:
Tyco Electronics
Datasheet:
Part Number:
Description:
CONN HEADR BRKWAY .100 13POS STR
Manufacturer:
Tyco Electronics
Datasheet:
Part Number:
Description:
CONN HEADR BRKWAY .100 13POS STR
Manufacturer:
Tyco Electronics
Datasheet:
Part Number:
Description:
CONN HEADR BRKWAY .100 13POS R/A
Manufacturer:
Tyco Electronics
Datasheet: