BFC233660222 Vishay, BFC233660222 Datasheet - Page 11

• Manufacturer Part Number: BFC233660222
• Description: CAPACITOR, CLASS Y2 0.0022CAPACITOR, CLASS Y2 0.0022
• Manufacturer: Vishay
• Series: 2222336r

Specifications of BFC233660222

• Capacitance: 2200pF
• Tolerance (+ Or -): 20%
• Voltage: 300VAC
• Temp Coeff (dielectric): PLYP
• Mounting Style: Through Hole
• Construction: Radial
• Failure Rate: Not Required
• Seated Plane Height: 10mm
• Product Diameter (mm): Not Requiredmm
• Product Height (mm): 10mm
• Product Depth (mm): 4mm
• Product Length (mm): 12.5mm
• Lead Spacing (nom): 10mm
• Lead Diameter (nom): 0.6mm
• Operating Temp Range: -55C to 105C
• Package / Case: Not Required
• Voltage Rating, Ac: 250V
• Voltage Rating, Dc: 630V
• Capacitor Dielectric Type: POLYPROPYLENE
• Tolerance,: 20%
• Tolerance, -: 20%
• Temp, Op.: ROHS COMPLIANT
• Lead Free Status / RoHS Status: Compliant

Document Number: 28115
Revision: 03-May-10
SUB - CLAUSE NUMBER
AND TEST
SUB - GROUP C 4
4.15 Charge and discharge
4.15.1 Initial measurements
4.15.3 Final measurements
SUB - GROUP C5
4.16 Radio frequency characteristic
SUB - GROUP C6
4.17 Passive flammability
SUB - GROUP C7
4.18 Active flammability
Class B
Interference Suppression Film Capacitors
MKP Radial Potted Type
OR
ND
D
D
D
D
D
For technical questions, contact:
10 000 cycles
(50 c/s) charge to UR half sinewave
Duration: 5 ms
Discharge resistance:
R
Capacitance
Tangent of loss angle at 10 kHz
Capacitance
Tangent of loss angle
Insulation resistance
Resonance frequency
Bore of gas jet: Ø 0.5 mm
Fuel: butane
Test duration for actual volume V in mm³:
V ≤ 250: 10 s
250 < V ≤ 500: 20 s
500 < V ≤ 1750: 30 s
V > 1750: 60 s
20 x 5 kV discharges on the test capacitor
connected to U
R
One flame application
min.
=
-------------------------------------------------- -
1.5 C dU
= 2.2 Ω
×
420 Vdc
(
CONDITIONS
45.0°
(
R
)
⁄
(
dt
~ 8 mm
)
)
12 mm
[e-mail]
|DC/C| ≤ 10 % compared to values
measured in 4.15.1.
Increase of tan δ:
Compared to values measured in 4.15.1.
≥ 50 % of values specified in section
“Insulation resistance” of this specification
As specified in section “Resonant
frequency” of this specification. ± 10 %
After removing test flame from capacitor,
the capacitor must not continue to burn for
more than 10 s. No burning particle must
drop from the sample.
The cheese cloth around the capacitors
shall not burn with a flame.
No electrical measurements are required.
PERFORMANCE REQUIREMENTS
Vishay BCcomponents
≤ 0.008
MKP 336 6 Y2
www.vishay.com
11