ECG002B-G TriQuint, ECG002B-G Datasheet - Page 5

• Manufacturer Part Number: ECG002B-G
• Description: RF Amplifier DC-6 GHz +15.5dBm P1dB@1 GHz
• Manufacturer: TriQuint
• Type: General Purpose Amplifierr

Specifications of ECG002B-G

• Operating Frequency: 6000 MHz
• Noise Figure: 3.7 dB
• Operating Supply Voltage: 3.9 V
• Supply Current: 45 mA
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Package / Case: SOT-89
• Minimum Operating Temperature: - 40 C
• Number Of Channels: 1 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 1066899

ECG002
InGaP HBT Gain Block
TriQuint Semiconductor, Inc
This package is lead-free/Green/RoHS-compliant. The plating material on the pins is annealed matte tin over copper. It is compatible with
both lead-free (maximum 260 C reflow temperature) and leaded (maximum 245 C reflow temperature) soldering processes.
Phone [phone]
Outline Drawing
Land Pattern
ECG002C-G Mechanical Information
FAX: [phone]
e-mail: [e-mail]
Web site: www.TriQuint.com
Specifications and information are subject to change without notice
The component will be marked with a two-
digit numeric lot code (shown as “XX”)
followed with a “K” designator on the top
surface of the package.
Tape and reel specifications for this part are
located on the website in the “Application
Notes” section.
ESD Rating: Class 1A
Value:
Test:
Standard:
MSL Rating: Level 3 at +260 C convection reflow
Standard:
1. Ground / thermal vias are critical for the proper performance of
2. Add as much copper as possible to inner and outer layers near
3. Mounting screws can be added near the part to fasten the board
4. Do not put solder mask on the backside of the PC board in the
5. RF trace width depends upon the PC board material and
6. Use 1 oz. Copper minimum.
7. All dimensions are in millimeters (inches). Angles are in
Mounting Config. Notes
this device. Vias should use a .35mm (#80 / .0135”) diameter
drill and have a final plated thru diameter of .25 mm (.010”).
the part to ensure optimal thermal performance.
to a heatsink.
contacts the heatsink.
region where the board contacts the heatsink.
construction.
degrees.
MSL / ESD Rating
Product Marking
Passes between 250 and 500V
Human Body Model (HBM)
JEDEC Standard JESD22-A114
JEDEC Standard J-STD-020
Ensure that the ground / thermal via region
Page 5 of 7 August 2009