AH314-G TriQuint, AH314-G Datasheet - Page 8

• Manufacturer Part Number: AH314-G
• Description: RF Amplifier 2300-2900MHz 23dB
• Manufacturer: TriQuint
• Type: Driver Amplifierr

Specifications of AH314-G

• Operating Frequency: 2.3 GHz to 2.9 GHz
• P1db: 33 dBm at 2.6 GHz
• Noise Figure: 6.4 dB at 2.6 GHz
• Supply Current: 700 mA
• Maximum Operating Temperature: + 150 C
• Number Of Channels: 5 Channels
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 1066984

© 2010 TriQuint Semiconductor, Inc.
AH314
2.3-2.9 GHz 2W 5V Linear Driver Amplifier
Package Information and Dimensions
Mounting Configuration
Notes:
1.
2.
3.
4.
5.
6.
7.
8.
Data Sheet: Rev A 08/27/10
Lead-free/Green/RoHS-compliant.
Package pin plating - NiPdAu.
Compatible with lead-free (Tmax=260°C)
and lead (Tmax=245 °C) soldering processes.
Mechanical Information
The AH314-G will be marked with an
“AH314G” designator on the top surface of
the package. An alphanumeric lot code
(“XXXX”) is also marked below the part
designator.
All dimensions are in millimeters (inches). Angles
are in degrees
Ground/Thermal vias are critical for the proper
performance of this device. Vias should be .35mm
(#80/.135”) diameter drill and have a final plated
thru diameter of .25mm (.010”).
Add as much copper as possible to inner and outer
layers near the part to ensure optimal thermal
performance.
To ensure reliable operation, device ground paddle-
to-ground pad solder joint is critical
Add mounting screws near the part to fasten board to
a heat sink. Ensure that the ground/thermal via
region contacts the heat sink
Do not put solder mask on the backside of the PC
Board in the region where the board contacts the heat
sink.
RF trace width depends upon the PC board
construction and material
Use 1oz copper minimum
- 8 of 9 -
Connecting the Digital World to the Global Network
Disclaimer: Subject to change without notice
®