ATA559001-DBW Atmel, ATA559001-DBW Datasheet - Page 55
ATA559001-DBW
Manufacturer Part Number
ATA559001-DBW
Description
RF Wireless Misc UHF (1kbit r/w anti- collis. Ni-Au)
Manufacturer
Atmel
Datasheet
1.ATA559001-6DSY.pdf
(107 pages)
Specifications of ATA559001-DBW
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
- Current page: 55 of 107
- Download datasheet (944Kb)
8.1.6
8.1.7
8.2
8.2.1
4817C–RFID–03/07
Command Coding
Modulation During the Forward Header
Modulation During the Forward Link
Long Command Codes
ATA5590 changes the state of modulation during the forward header. The modulator is at state0
for a time1 after notch. Time1 is the time the tag needs for internal calculations, and is therefore
also the minimum time for a logical 0.
Note:
Figure 8-3.
Figure 8-3 on page 55
which selects the internal clock frequency. This mechanism has an influence on the backscat-
tered modulation stream if the dynamic coding mechanism is selected (accuracy of the timing).
After becoming synchronous to the link (ATA5590 has received a full command correctly),
ATA5590 backscatters the received data back to the reader.
The modulation coding type is the type which was defined in the previous command. Therefore,
the reader is able to control the link on the fly.
The reset value is Soft NRZI
If a timing reference is needed for encoding, ATA5590 uses the time of 0* as a timing reference.
Commands can control the function of the tag.
After getting the timing definition for PIE out of the forward header section, the tag receives a
6-bit command and 2-bit CRC information. ATA5590 checks the CRC after receiving this 8-bit
frame. If the CRC check passes and the reader does not send an EOT after this section, the tag
interprets the next 8-bit field as a parameter field. An address field, data field, or both can follow
the parameter field (depending on the command and the supported addressing mode which is
stored in the parameter field). At the end, an end of file (EOT) symbol is expected.
Backscatter
Oscillator speed
modulation
The tag operates clock synchronous to an internal oscillator. Therefore, the absolute time is the
difference from bit to bit.
Forward
reader
signal
Modulation During the Forward Header (Tag is Synchronous)
Slow
shows an example of the implemented power management mechanism
Fast
ATA5590
55
Related parts for ATA559001-DBW
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
1-kbit UHF R/w Idic With Anti-collision Function
Manufacturer:
ATMEL Corporation
Datasheet:
Part Number:
Description:
DEV KIT FOR AVR/AVR32
Manufacturer:
Atmel
Datasheet:
Part Number:
Description:
INTERVAL AND WIPE/WASH WIPER CONTROL IC WITH DELAY
Manufacturer:
ATMEL Corporation
Datasheet:
Part Number:
Description:
Low-Voltage Voice-Switched IC for Hands-Free Operation
Manufacturer:
ATMEL Corporation
Datasheet:
Part Number:
Description:
MONOLITHIC INTEGRATED FEATUREPHONE CIRCUIT
Manufacturer:
ATMEL Corporation
Datasheet:
Part Number:
Description:
AM-FM Receiver IC U4255BM-M
Manufacturer:
ATMEL Corporation
Datasheet:
Part Number:
Description:
Monolithic Integrated Feature Phone Circuit
Manufacturer:
ATMEL Corporation
Datasheet:
Part Number:
Description:
Multistandard Video-IF and Quasi Parallel Sound Processing
Manufacturer:
ATMEL Corporation
Datasheet:
Part Number:
Description:
High-performance EE PLD
Manufacturer:
ATMEL Corporation
Datasheet:
Part Number:
Description:
8-bit Flash Microcontroller
Manufacturer:
ATMEL Corporation
Datasheet:
Part Number:
Description:
2-Wire Serial EEPROM
Manufacturer:
ATMEL Corporation
Datasheet: