1-1394723-8 TE Connectivity, 1-1394723-8 Datasheet - Page 29
![no-image](/images/manufacturer_photos/0/6/654/te_connectivity_sml.jpg)
1-1394723-8
Manufacturer Part Number
1-1394723-8
Description
Manufacturer
TE Connectivity
Datasheet
1.1-1394723-8.pdf
(36 pages)
Specifications of 1-1394723-8
Lead Free Status / RoHS Status
Compliant
3.4 DC/AC Converter Receptacle
SOLARLOK Interconnection System
Assembly and Installation Guidelines
1 Place a single wire seal onto the wire and strip wire
2 Crimp the contact using the correct applicator for the wire gauge (# 114-74013)
3 Place O-ring onto the connector housing; push in wire to stop until contact locks into the housing
4 Push seal into the housing
5 Assembly of the cover cap (not available with every version) and mounting in front panel
■
■
■
All specifications subject to change. Consult Tyco Electronics for latest specifications.
(single wire seals are not available with every version).
Required panel mount hole diameter: Diameter 12.5 mm.
The panel thickness must not be under 1.0 mm.
For environmental protection of the unmated connector, use of the covering cap is recommended.
Cover:
Part No. 1394739-1
(continued)
Catalog 889753-3
Revised 6-2008
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 9
27