881545-3 TE Connectivity, 881545-3 Datasheet - Page 22

• Manufacturer Part Number: 881545-3
• Manufacturer: TE Connectivity
• Type: Shuntr

Specifications of 881545-3

• Number Of Contacts: 2POS
• Number Of Contact Rows: 1
• Pitch (mm): 2.54mm
• Gender: F
• Body Orientation: Straight
• Current Rating (max): 3/ContactA
• Housing Material: Nylon
• Contact Material: Phosphor Bronze
• Contact Plating: Gold Over Nickel
• Operating Temp Range: -65C to 105C
• Housing Color: Black
• Contact Resistance Max: 15mOhm
• Product Height (mm): 2.5mm
• Product Depth (mm): 10.9mm
• Product Length (mm): 5.08mm
• Product Type: Shunt
• Shunt Type: Novo
• Shunt Style: Open Top
• Profile: Low
• Termination Resistance (m?): 15
• Contact - Rated Current (a): 3
• Height (mm [in]): 10.90 [0.429]
• Number Of Positions: 2
• Centerline (mm [in]): 2.54 [0.100]
• Handle: With
• Contact Plating, Mating Area, Material: Gold (50)
• Contact Base Material: Phosphor Bronze
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not reviewed for lead free solder process
• Rohs/elv Compliance History: Always was RoHS compliant
• Temperature Range (°c): -65 – +105
• Packaging Method: Loose Piece
• Lead Free Status / RoHS Status: Compliant

7
300
For Crimp Snap-In
Receptacles and Locking
Clip Contacts
Note: All part numbers are RoHS
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
compliant.
are metric equivalents.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
AMPMODU Interconnection System
Application Tooling
Side-Feed Heavy-Duty
Miniature Applicators
(Coded HDM)
AMP-O-LECTRIC Model “G”
Terminating Machines,
354500-1, -9, -11
AMPOMATOR CLS IV+
Lead-Making Machines,
356500-1, -2, 1213400-1, -2
Note: For additional tooling options, contact Tyco Electronics or reference the Tyco Electronics web site.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Interchangeable applicators
for crimping products reeled
side-by-side on single or
dual carrier strips (primarily
closed-barrel terminals and
open-barrel contacts).
Similar design as the end-
feed version. All side-feed
applicators include a wire
stop to help correctly
position the wire end in the
crimping target area.
Semiautomatic bench
machines for crimping
reeled terminals and
contacts, featuring a quiet
and reliable direct motor
drive, microprocessor
controls for ease of setup
and operation, and guarding
and lighting designed for
operator convenience and
safety. All models are
equipped with either manual
or automatic precision
adjustment of crimp height.
Machine-mounted sensors
are available for crimp
quality monitoring using
conventional miniature-style
applicators.
Fully-automatic machines
that measure, cut, strip and
terminate single leads.
Microprocessor-controlled,
and programmed and
operated using an easy-to-
follow, menu-driven
touchscreen. Features
include direct-drive
terminating units with
precision crimp height
adjustment, fully
programmable setups, wire
runout and splice detection,
and motorized pre-feed with
wire straightener. Crimp
quality monitoring is also
available.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
For more information, request
Instruction Sheet 408-8040.
Specifications
Width — 18.7-25.3 [475-643]
depending on applicator type
Depth — 21.5-28.1 [546-713]
depending on applicator type
Height — 20 [508]
Weight — 240 lb [110 kg]
Electrical — 120 or 220 VAC, 50
or 60 Hz; 310 VA
Air — 90-110 psi [6.21-7.59 bar],
6 scfm [0.00282 m
required with air-feed applicators
Wire Range — 26-10 AWG
[0.12-6 mm
depending on product applied
For more information, request
Catalog 65828, Video 198116,
Catalog 82275 [Crimp Quality
Monitor (CQM)], Video 198094.
Specifications
Width — 159 [4 040]
Depth — 68 [1 730]
Height — 86 [2 185] with
24 [610] dia. reel
Weight — 2 000 lb [907 kg]
Electrical — 220 VAC, 50 or
60 Hz, single phase, 25 A, with
neutral and ground
Air — 90 psi [6.21 bar], 15 scfm
[0.0071 m
Wire Range — 26-10 AWG
[0.12-6 mm
[0.12-1.4 mm
Lead Lengths — 3-90
[76.2-2 285], 90-1 000
[2 285-25 400] with long lead
conveyors
For more information, request
Catalog 124324, Video 198142
(NTSC), 199609 (PAL).
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
3
/s] sustained
2
2
] solid or stranded,
] stranded, 26-16 AWG
2
] solid
3
/s] when