D2HW-C221M Omron, D2HW-C221M Datasheet - Page 3

• Manufacturer Part Number: D2HW-C221M
• Description: SWITCH SUBMINIATURE BASIC SPDT
• Manufacturer: Omron
• Series: D2HWr

Specifications of D2HW-C221M

• Circuit: SPDT
• Switch Function: On-Mom
• Contact Rating @ Voltage: 2A @ 12VDC
• Actuator Type: Lever, Straight
• Mounting Type: Chassis Mount
• Termination Style: Wire Leads
• Operating Force: 50gf
• Actuator: Lever
• Contact Form: SPDT
• Ip Rating: IP 67
• Current Rating (max): 2 Amps
• Voltage Rating Ac: 125 Volts
• Voltage Rating Dc: 42 Volts
• Contact Rating: 1 Amp at 24 Volts
• Mounting: Screw
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: D2HW-C221M; D2HWC221M; SW1156

Ordering Information
Note: 1. The length of standard lead wires (AVSS 0.5 = standard with UL1007 AWG 24 used on UL/CSA models.) for lead wire models is 30 cm (12 in).
Specifications
■ Characteristics
Note: 1. The data given above are initial values.
■ Ratings
Note: The ratings apply under the following test conditions: Ambient Temperature = 20±2°C, Ambient Humidity = 65±5%, Operating frequency = 30 operations/min.
Actuator
Simulated roller
leaf lever
Long leaf lever
Item
Operating speed
Operating frequency
Insulation resistance
Contact resistance
Dielectric strength
Vibration resistance (See note 2)
Shock resistance (See note 2)
Life expectancy
(Consult Omron for test conditions)
Degree of protection
Degree of protection against electric
shock
Proof tracking index (PTI)
Ambient operating temperature
Ambient operating humidity
Weight
Rated voltage (V)
125 VAC
12 VDC
24 VDC
42 VDC
(initial value)
2. Add “S” to the end of the model number for the UL/CSA-approved version. Consult your OMRON sales representative for details.
2. For the pin plunger models, the above values apply for use at the free position, operating position, and total travel position. For the lever
models, they apply at the total travel position. The values shown apply for malfunctions of 1 ms max.
Terminals
Solder
Lead wire
Lead wire
-
continued from previous page
Downwards
Right-side
Left-side
Downwards
Right-side
Specification
1 mm to 500 mm/s (for pin plunger models)
30 operations/min.
100 MΩ min. (at 500 VDC)
100 mΩ max. (lead wire models: 150 mΩ max.)
600 VAC, 50/60 Hz for 1 min. between terminals of the same polarity
1,500 VAC,50/60 Hz for 1 min. between current-carrying metal parts and ground, and between
each terminal and non-current-carrying metal parts
Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
Destruction: 1,000 m/s
Malfunction: 300 m/s
Mechanical: 1,000,000 operations min. (30 operations/min.)
Electrical: 100,000 operations min. (20 operations/min.)
IP67 (excluding the terminals on terminal models)
Class I
175
-40 to 85°C (with no icing)
95% max. (in temperature range 5° to 35°C)
Approx. 0.7 g (for pin plunger models with terminals)
Contact form
SPDT
SPDT
SPST-NC
SPST-NO
SPST-NC
SPST-NO
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPST-NC
SPST-NO
2
max.
Sealed Subminiature Snap Action Switch
2
Resistive load
0.1 A
2 A
1 A
0.5 A
max.
Model
With posts on right With posts on left
D2HW-BR271H
D2HW-BR271M
D2HW-BR272M
D2HW-BR273M
D2HW-BR272MR
D2HW-BR273MR
D2HW-BR272ML
D2HW-BR273ML
D2HW-BR281M
D2HW-BR282M
D2HW-BR283M
—
—
D2HW-BL271H
D2HW-BL271M
D2HW-BL272M
D2HW-BL273M
D2HW-BL272MR
D2HW-BL273MR
D2HW-BL272ML
D2HW-BL273ML
D2HW-BL281M
D2HW-BL282M
D2HW-BL283M
—
—
M3-screw mounting
D2HW-C271H
D2HW-C271M
D2HW-C272M
D2HW-C273M
D2HW-C272MR
D2HW-C273MR
D2HW-C281M
D2HW-C282M
D2HW-C283M
D2HW-C282MR
D2HW-C283MR
—
—
D2HW
183