TC1264-3.0VAB Microchip Technology, TC1264-3.0VAB Datasheet - Page 3

• Manufacturer Part Number: TC1264-3.0VAB
• Description: LDO Regulator Pos 3V 0.8A 3-Pin (3+Tab) TO-220
• Manufacturer: Microchip Technology
• Type: Linearr

Specifications of TC1264-3.0VAB

• Package: 3TO-220
• Function: LDO
• Number Of Outputs: 1
• Input Voltage Range: 6 to 2.7 V
• Output Voltage: 3 V
• Maximum Output Current: 0.8(Min) A
• Output Type: Fixed
• Accuracy: ±0.5 %
• Typical Dropout Voltage @ Current: 0.02@100uA|0.05@100mA|0.15@300mA|0.26@500mA|0.45@800mA V
• Operating Temperature: -40 to 125 °C
• Polarity: Positive
• Regulator Topology: Positive Fixed
• Voltage - Output: 3V
• Voltage - Input: Up to 6V
• Voltage - Dropout (typical): 1.2V @ 800mA
• Number Of Regulators: 1
• Current - Output: 800mA (Min)
• Mounting Type: Through Hole
• Package / Case: TO-220-3
• Input Voltage Max: 6 V
• Dropout Voltage (max): 1400 mV
• Output Current: 800 mA
• Line Regulation: 0.001 %
• Load Regulation: 0 % / mA
• Voltage Regulation Accuracy: 0.5 %
• Maximum Operating Temperature: + 125 C
• Mounting Style: Through Hole
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Limit (min): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: TC12643.0VAB

2.0
The descriptions of the pins are listed in Table 2-1.
TABLE 2-1:
3.0
The TC1264 is a precision, fixed output LDO. Unlike
bipolar regulators, the TC1264’s supply current does
not increase with load current. In addition, V
remains stable and within regulation over the entire
0mA to I
consideration in RTC and CMOS RAM battery back-up
applications).
Figure 3-1 shows a typical application circuit.
FIGURE 3-1:
©
(3-Pin SOT-223)
(3-Pin DDPAK)
(3-Pin TO-220)
Battery
2002 Microchip Technology Inc.
Pin No.
1
2
3
PIN DESCRIPTIONS
DETAILED DESCRIPTION
LOAD
+
–
MAX
+
PIN FUNCTION TABLE
C1
1µF
load current range (an important
Symbol
V
GND
V
OUT
TYPICAL APPLICATION
CIRCUIT
IN
V
GND
IN
TC1264
Unregulated supply input.
Ground terminal.
Regulated voltage output.
V
OUT
+
C2
1µF
V
OUT
OUT
3.1
A 1µF (min) capacitor from V
The output capacitor should have an effective series
resistance greater than 0.1Ω and less than 5Ω. A 1µF
capacitor should be connected from V
is more than 10 inches of wire between the regulator
and the AC filter capacitor, or if a battery is used as the
power source. Aluminum electrolytic or tantalum
capacitor types can be used. (Since many aluminum
electrolytic capacitors freeze at approximately -30°C,
solid tantalums are recommended for applications
operating below -25°C.) When operating from sources
other than batteries, supply-noise rejection and
transient response can be improved by increasing the
value of the input and output capacitors and employing
passive filtering techniques.
Description
Output Capacitor
OUT
to ground is required.
TC1264
IN
DS21375B-page 3
to GND if there