TC1264-3.0VAB Microchip Technology, TC1264-3.0VAB Datasheet - Page 6

• Manufacturer Part Number: TC1264-3.0VAB
• Description: LDO Regulator Pos 3V 0.8A 3-Pin (3+Tab) TO-220
• Manufacturer: Microchip Technology
• Type: Linearr

Specifications of TC1264-3.0VAB

• Package: 3TO-220
• Function: LDO
• Number Of Outputs: 1
• Input Voltage Range: 6 to 2.7 V
• Output Voltage: 3 V
• Maximum Output Current: 0.8(Min) A
• Output Type: Fixed
• Accuracy: ±0.5 %
• Typical Dropout Voltage @ Current: 0.02@100uA|0.05@100mA|0.15@300mA|0.26@500mA|0.45@800mA V
• Operating Temperature: -40 to 125 °C
• Polarity: Positive
• Regulator Topology: Positive Fixed
• Voltage - Output: 3V
• Voltage - Input: Up to 6V
• Voltage - Dropout (typical): 1.2V @ 800mA
• Number Of Regulators: 1
• Current - Output: 800mA (Min)
• Mounting Type: Through Hole
• Package / Case: TO-220-3
• Input Voltage Max: 6 V
• Dropout Voltage (max): 1400 mV
• Output Current: 800 mA
• Line Regulation: 0.001 %
• Load Regulation: 0 % / mA
• Voltage Regulation Accuracy: 0.5 %
• Maximum Operating Temperature: + 125 C
• Mounting Style: Through Hole
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Limit (min): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: TC12643.0VAB

TC1264
4.0
The TC1264 is a precision, fixed output LDO. Unlike
bipolar regulators, the TC1264’s supply current does
not increase with load current. In addition, V
remains stable and within regulation over the entire
0mA to I
consideration in RTC and CMOS RAM battery back-up
applications).
Figure 4-1
FIGURE 4-1:
DS21375D-page 6
V
IN
DETAILED DESCRIPTION
LOAD
shows a typical application circuit.
MAX
GND
V
IN
TC1264
load current range (an important
Typical Application Circuit.
SHDN
V
OUT
+
C
1 µF
1
V
OUT
OUT
4.1
A 1 µF (min) capacitor from V
The output capacitor should have an effective series
resistance greater than 0.1 and less than 5. A 1 µF
capacitor should be connected from V
is more than 10 inches of wire between the regulator
and the AC filter capacitor, or if a battery is used as the
power source. Aluminum electrolytic or tantalum
capacitor types can be used. (Since many aluminum
electrolytic capacitors freeze at approximately -30°C,
solid tantalums are recommended for applications
operating below -25°C.) When operating from sources
other than batteries, supply-noise rejection and
transient response can be improved by increasing the
value of the input and output capacitors and employing
passive filtering techniques.
Output Capacitor
 2010 Microchip Technology Inc.
OUT
to ground is required.
IN
to GND if there