DEMO9RS08KA8 Freescale, DEMO9RS08KA8 Datasheet

no-image

DEMO9RS08KA8

Manufacturer Part Number
DEMO9RS08KA8
Description
Manufacturer
Freescale
Datasheet
1.DEMO9RS08KA8.pdf (2 pages)

Specifications of DEMO9RS08KA8

Lead Free Status / RoHS Status
Compliant
0. Introduction
This quick start guide will walk you through setting up your demo board, connecting it to the PC, and launching
the provided example. For more information, please read the demo board’s user’s manual.
1. Run the Factory Programmed Example (Standalone Mode)
1.
2.
3.
4.
5.
6.
7.
2. Host Mode
The same example above can be run from the host PC, with the exception that the “LED0” LED is not used (since
this line is shared with the BKGD line needed for BDM communication). To do this, the CodeWarrior Development
Tools and the SofTec Microsystems Additional Components must be installed first.
Install CodeWarrior Development Studio
To install the CodeWarrior Development Studio, insert the CodeWarrior CD-ROM into your computer’s CD-ROM
drive. A startup window will automatically appear. Follow the on-screen instructions.
Ensure that the “POWER SEL” jumper selects the “UNREG” position.
Ensure that the “VDD” jumper selects the “ENABLE” position.
Ensure that all of the “I/O ENABLE” jumpers are inserted.
Power on the Demonstration Board through the 12 V DC plug-in power supply.
The green “POWER” LED on the board should turn on.
Depending on the temperature sensed by the NTC network, the “LED0”, “LED1” and “LED2”
LEDs will turn on as illustrated below.
Press the “SW0” push-button. The “LED0”, “LED1” and “LED2” LEDs will blink.
DEMO9RS08KA2
Quick Start Guide
between 10°C and 20°C
between 20°C and 30°C
Sensed Temperature
< 10°C
> 30°C
Rev. 1.0
LEDs
LED2
LED1
LED0
LED2
LED1
LED0
LED2
LED1
LED0
LED2
LED1
LED0

DEMO9RS08KA8 Summary of contents

Page 1

... The same example above can be run from the host PC, with the exception that the “LED0” LED is not used (since this line is shared with the BKGD line needed for BDM communication this, the CodeWarrior Development Tools and the SofTec Microsystems Additional Components must be installed first. Install CodeWarrior Development Studio To install the CodeWarrior Development Studio, insert the CodeWarrior CD-ROM into your computer’ ...

Page 2

... DC01089 Trademarks SofTec Microsystems is a registered trademark of SofTec Microsystems, Spa. Freescale™ and the Freescale logo are trademarks of Freescale Semiconductor, Inc. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation registered trademark of International Business Machines Corporation. Other products and company names listed are trademarks or trade names of their respective ...