EVBQE128 Freescale, EVBQE128 Datasheet - Page 15

• Manufacturer Part Number: EVBQE128
• Manufacturer: Freescale

Specifications of EVBQE128

• Lead Free Status / RoHS Status: Compliant

4 Hardware Setup
4.1 First Connection
The Evaluation Board is connected to a host PC through a USB port. Connection steps are
listed below in the recommended flow order:
1.
2.
3.
4.
5.
6.
7.
8.
Install all the required system software as described in the previous section.
Power the board through either the barrel connector or the USB connector, making sure
that the “POWER SEL” jumper selects the correct power source.
Make sure the “ON-OFF” switch is in the “ON” position. The “POWER” LED will turn on.
Insert one end of the USB cable into a free USB port of the PC.
Insert the other end of the USB cable into the USB connector on the Evaluation Board.
The first time the Evaluation Board is connected to the PC, Windows recognizes the
instrument and starts two separate “Found New Hardware Wizard” procedures: one
for the main USB driver and one for the USB virtual COM port driver.
The first “Found New Hardware Wizard” procedure asks you to specify the USB driver
to use for the instrument. On Windows XP (SP2) the following dialog box will appear.
Select the “No, not this time” option and click the “Next >” button.
The following dialog box will appear.
Page 13