EVB9S08DZ60 Freescale, EVB9S08DZ60 Datasheet - Page 2

• Manufacturer Part Number: EVB9S08DZ60
• Manufacturer: Freescale

Specifications of EVB9S08DZ60

• Lead Free Status / RoHS Status: Compliant

To install the SofTec Microsystems Additional Components, insert the SofTec Microsystems “System Software”
CD-ROM into your computer’s CD-ROM drive. A startup window will automatically appear. Choose “Install
Instrument Software” from the main menu. A list of available software will appear. Click on the “Additional
Components” option. Follow the on-screen instructions.
First Connection with the PC
The Evaluation Board is connected to a host PC through a USB port. Connection steps are listed below in the
recommended flow order:
1.
2.
3.
4.
5.
6.
7.
Step-By-Step Tutorial
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. From the main menu, choose “Run > Single Step”. The instruction highlighted in the Source window will be
11. From the main menu, choose “Run > Start/Continue”. The application will restart from where it was
Copyright © 2006 SofTec Microsystems
DC01104
Install all the required system software as described in the previous section.
Power the board through either the barrel connector or the banana connectors.
Make sure the “ON-OFF” switch is in the “ON” position. The “POWER” LED will turn on.
Insert one end of the USB cable into a free USB port of the PC.
Insert the other end of the USB cable into the USB connector on the Evaluation Board.
The first time the Evaluation Board is connected to the PC, Windows recognizes the instrument and starts
the “Found New Hardware Wizard” procedure, asking you to specify the driver to use for the instrument.
Follow the Wizard steps, choosing to install the software automatically when requested.
The Evaluation Board’s USB driver is now installed on your system.
Set up the board so that it works in host mode (the “RESET ENABLE” and “BKGD ENABLE” jumpers in the
“USB TO BDM INTERFACE” section must be inserted).
Ensure that the Evaluation Board is connected to the PC (via the USB cable) and that the board is powered
on.
Start CodeWarrior by selecting it in the Windows Start menu.
From the CodeWarrior main menu, choose “File > Open” and choose the “\Program Files\Freescale\
CodeWarrior for HC08 V5.1\(CodeWarrior Examples)\HCS08\Evaluation Board
Examples\EVB9S08DZ60\C\Demo\Demo.mcp”.
Click “Open”. The Project window will open.
The code of this example is contained in the “main.c” file. Double click on it to open.
From the main menu, choose “Project > Debug”. This will compile the source code, generate an
executable file and download it to the evaluation board.
A new debugger environment will open. From the main menu, choose “Run > Start/Continue”. The
program will be executed in real-time.
From the main menu, choose “Run > Halt”. The program execution will stop. The next instruction to be
executed is highlighted in the Source window.
executed, and the program execution will be stopped immediately after.
previously stopped.
i
i
Note: to install the Additional Components on Windows 2000 or Windows XP, you
must log in as Administrator.
Note: before to connect the board to the PC, it is important that you install the
required system software as described in the previous section.
®
Trademarks
SofTec Microsystems is a registered trademark of SofTec Microsystems, Spa.
Freescale™ and the Freescale logo are trademarks of Freescale Semiconductor, Inc.
Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation.
PC is a registered trademark of International Business Machines Corporation.
Other products and company names listed are trademarks or trade names of their respective
companies.