1102855-3 TE Connectivity, 1102855-3 Datasheet - Page 21
![Assembly Tools, HTS Heavy Duty Connectors HTS Tools](/photos/27/31/273187/4688409_sml.jpg)
1102855-3
Manufacturer Part Number
1102855-3
Description
Assembly Tools, HTS Heavy Duty Connectors HTS Tools
Manufacturer
TE Connectivity
Type
Extractor Toolr
Specifications of 1102855-3
Tyco/amp Hvt Series Crimp Contact Heavy-duty Connectors & Solarlok Photovoltaic Interconnection System
RoHS Compliant
Lead Free Status / RoHS Status
Compliant
For Use With
All Wire Sizes
Lead Free Status / Rohs Status
RoHS Compliant part
- Current page: 21 of 236
- Download datasheet (9Mb)
HTS Industrie Steckverbinder
Verbindlich für Toleranzen der Abmessungen und technische Werte sind ausschließlich die neuesten Tyco Electronics Kundenzeichnungen bzw. Produkt-Spezifikationen, die Sie auf Anfrage erhalten.
All specifications subject to change. Consult Tyco Electronics for latest design specifications.
For safety reasons, electrical equipment needs to be protected against outside influences. The basis for the determination is the stan-
dard IEC 529 titled ‘Degree of protection provided by enclosures (IP – Code)'.
Using a standardized test procedure the extent of the protection class is verified. To classify different housings according to their protec-
tion class, a designation system is used which consists of the code – letters 'IP' and two code numbers.
Arrangement of the IP – Code (International bzw. Ingress Protection)
Code Letter
1st characteristic numeral
2nd characteristic numeral
Meaning of the 1st characteristic numeral
The first numeral describes the protection of the housing against intrusion of foreign bodies as well as the protection of people against
dangerous parts or influences. Because of this, there are two descriptions and definitions for each of the first code letter.
Degree of protection provided by enclosures
numeral
1st
0
1
2
3
4
5
6
no protection
-protection against solid foreign bodies of Ø 50mm
-protection against access to hazardous parts with
-protection against solid foreign bodies of Ø 12 mm
-protection against access to hazardous parts with
-protection against solid foreign bodies of 2,5 mm
-protection against access to hazardous parts with a
-protection against solid foreign bodies of 1,0 mm
-protection against access to hazardous parts
-
protected against dust
dust proof
short description
the back of a hand
the finger
diameter and bigger
tool
diameter and bigger
with a wire
IP
Protection against solid obects and against access to hazardous parts
5
6
definition
A sphere of Ø 50mm, must not intrude
A sphere of Ø 12mm diameter, must not intrude
A sphere of Ø 2,5mm diameter, must not intrude
The probe, sphere of Ø 1,0mm, must not intrude
The infiltration of dust is not completely prevented, but it
does not infiltrate to such an extent that the operation or
the safety of the device is affected.
No infiltration of dust
HTS Heavy Duty Connectors
19