CMA02040X1009GB300 Vishay, CMA02040X1009GB300 Datasheet - Page 4

• Manufacturer Part Number: CMA02040X1009GB300
• Description: Res Carbon Film 1406 10 Ohm 2% 1/4W Molded Melf SMD Blister T/R
• Manufacturer: Vishay
• Type: Carbon Filmr
• Series: CMAr

Specifications of CMA02040X1009GB300

• Case Size: 1406
• Resistance Value: 10 Ohm
• Power Rating: 1/4 W
• Tolerance: 2 %
• Resistance: 10 Ohms
• Voltage Rating: 200 Volts
• Resistance (ohms): 10
• Power (watts): 0.4W
• Composition: Carbon Film
• Features: Pulse Withstanding
• Size / Dimension: 0.055" Dia x 0.142" L (1.40mm x 3.60mm)
• Lead Style: Surface Mount (SMD - SMT)
• Package / Case: MELF, 0204
• Resistance In Ohms: 10.0
• Case: 0204
• Termination Style: MELF
• Dimensions: 1.4 mm Dia. x 3.6 mm L
• Resistance Tolerance: ± 2%
• Resistor Element Material: Carbon Film
• Resistor Case Style: SMD
• No. Of: RoHS Compliant
• Temperature Coefficient: - 250ppm/K
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Height: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: CMA-10TR

DESCRIPTION
Production of the CMA 0204 specialty MELF resistors with
advanced pulse load capability is strictly controlled and
follows an extensive set of instructions established for
reproducibility. A homogeneous and dense carbon film is
deposited on a high grade ceramic body (85 % Al
plated steel termination caps are firmly pressed on the
coated rods. A special laser is used to achieve the target
value by smoothly cutting a helical groove in the resistive
layer without damaging the ceramics. The resistors are
covered by protective coating designed for electrical,
mechanical and climatic protection.The terminations receive
a final pure tin on nickel plating. Four color code rings
designate the resistance value and tolerance in accordance
with IEC 60 062
The result of the determined production is verified by an
extensive testing procedure performed on 100 % of the
individual resistors. Only accepted products are laid directly
into the blister tape in accordance with IEC 60 286-3
ASSEMBLY
The resistors are suitable for processing on automatic
SMD assembly systems. They are suitable for automatic
soldering using wave, reflow or vapour phase as shown in
IEC 61760-1
extended storage in excess of 10 years. The encapsulation
is resistant to all cleaning solvents commonly used in the
electronics industry, including alcohols, esters and aqueous
solutions. The resistors are completely lead (Pb)-free, the
pure tin plating provides compatibility with lead (Pb)-free
soldering processes. The immunity of the plating against tin
whisker growth has been proven under extensive testing.
All products comply with the GADSL
CEFIC-EECA-EICTA
hazardous substances. This includes full compliance with
the following directives:
• 2000/53/EC End of Vehicle life Directive (ELV) and Annex II
• 2002/95/EC Restriction of the use of Hazardous
• 2002/96/EC Waste Electrical and Electronic Equipment
Notes
(1)
(2)
(3)
Document Number: 28717
Revision: 01-Mar-10
(ELV II)
Substances Directive (RoHS)
Directive (WEEE)
Global Automotive Declarable Substance List, see www.gadsl.org.
CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European trade
organisation representing the information and communications technology and consumer electronics), see
→ issues → environment policy → chemicals → chemicals for electronics.
The quoted IEC standards are also released as EN standards with the same number and identical contents.
(3)
. Excellent solderability is proven, even after
(3)
.
(2)
list of legal restrictions on
For technical questions, contact:
High Pulse Load MELF Resistors
(1)
2
O
and the
3
). Nickel
(3)
.
APPROVALS
Where applicable the resistors are tested in accordance with
EN 140401-803 (superseding CECC 40401-803) which
refers to EN 60115-1, EN 140400 and the variety of
enviromental text procedures of the IEC 60068
Vishay
Manufacturer” in accordance with IEC QC 001002-3,
clause 2. The release certificate for “Technology Approval
Schedule” in accordance with CECC 240001 based on
IEC QC 001002-3, clause 6 is granted for the Vishay
BEYSCHLAG manufacturing process.
[e-mail]
BEYSCHLAG
has
www.eicta.org/index.php?id=995
Vishay Beyschlag
achieved
CMA 0204
“Approval
www.vishay.com
(3)
series.
of
61