499252-8 TE Connectivity, 499252-8 Datasheet - Page 93

• Manufacturer Part Number: 499252-8
• Description: Connector Accessories 16 POS Receptacle Flat Cable Connector Strain Relief Thermoplastic Black
• Manufacturer: TE Connectivity
• Type: Strain Reliefr
• Series: AMP-LATCHr

Specifications of 499252-8

• Product Length (mm): 25.15mm
• Product Depth (mm): 6.09mm
• Product Height (mm): 14.75mm
• Accessory Type: Strain Relief
• No. Of Positions: 16
• Strain Relief Material: Thermoplastic
• No. Of Contacts: 16
• Rohs Compliant: Yes
• Color: Black
• Flammability Rating: UL 94V-0
• Material, Body: Thermoplastic
• Number Of Positions: 16
• Standards: RoHS compliant, ELV compliant
• Product Line: AMP-LATCH
• Accessory Color: Black
• Ul File Number: E28476
• Csa File Number: LR 7189
• Profile Height (y-axis) (mm [in]): 14.76 [0.581]
• Length (x-axis) (mm [in]): 25.15 [0.9902]
• Width (z-axis) (mm [in]): 6.10 [0.2402]
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold or Palladium Nickel or Performance Based
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Agency/standard: UL, CSA
• Ul Rating: Recognized
• Contact Transmits (typical Application): Signal (Data)
• Packaging Method: Bag
• Lead Free Status / RoHS Status: Compliant
• For Use With: Novo Receptacles, ECONOLATCH Receptacles
• Lead Free Status / Rohs Status: RoHS Compliant part

1. Place pinless header
2. With bottom of pc board
3. Apply an even, centered
over preinstalled posts
so that post tips start
into header cavities.
supported, place steel
block over header. Steel
block must be wider and
longer than header so
that it covers all four sides
of the header. However,
for headers with latches
pre-assembled, the steel
block must not interfere
with the latches.
force on steel block until
header bottoms on pc
board. If posts are
longer than .545 [13.84],
they may be forced
against the steel block
before the header is fully
seated. In this situation,
extreme caution must be
taken so that posts are
not damaged or pushed
out of the pc board.
93