5749609-1 TE Connectivity, 5749609-1 Datasheet - Page 30

• Manufacturer Part Number: 5749609-1
• Description: Connector Accessories Cover 26 POS Bag
• Manufacturer: TE Connectivity
• Type: Coverr
• Series: AMPLIMITE 0.050r

Specifications of 5749609-1

• Product Length (mm): 34.67mm
• Product Height (mm): 10.16mm
• Accessory Type: Shielded Backshell Kit
• Cable Exit Angle: 75°
• Connector Body Material: Zinc
• Rohs Compliant: Yes
• Product Type: Hardware
• Mating Connector Lock: With
• Mating Connector Lock Type: Spring Latch
• Product Series: Series III
• Backshell Kit Exit Style: Angled (75°)
• Backshell Material: Zinc
• Screw Material: Stainless Steel
• Strain Relief Clip Material: Steel
• Latching Spring Material: Stainless Steel
• Hardware Type: Backshell Kit
• Shielded: Yes
• Number Of Positions: 26
• Cable Insulation Diameter (mm [in]): 6.86 [0.270]
• Backshell Plating: Nickel over Copper
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Wire/Cable
• Packaging Method: Bag
• Packaging Quantity: 1
• Lead Free Status / RoHS Status: Compliant
• For Use With: 26 Position AMPLIMITE 0.050 Connectors
• Lead Free Status / RoHS Status: Compliant

Discrete Wire
Application Tooling
To meet medium to high
volume production of dis-
crete wire terminations,
Tyco Electronics offers the
following tooling:
The CHAMPOMATOR
Model 2.5 Bench
Terminating Machine—
Part No. 354786-1, used in
conjunction with Control
Module—Part No.
and Tie Bar—Part No.
1-762637-3.
Note: CHAMPOMATOR 2.5
Machine and Control Module
must be ordered separately by
part number.
Discrete Wire
Application Tooling
For low to medium volume
production use the
Tyco Electronics Arbor
Tool—Part No. 58024-1
equipped with Applicator—
Part No. 91291-1 and Special
Locator—Part No. 543506-1.
Cable-to-Shell Staple
Tooling (For discrete
wire jacketed cable only)
To meet medium to high
volume production use
Tyco Electronics Pneumatic
Crimper—Part No. 312522-3
equipped with Die Holder
Assembly—Part No. 58449-1
and Die—Part No. 90437-1 to
crimp outer backshells onto
inner backshells of connec-
tor kits and assemblies.
For low volume use Manual
Arbor Tool—Part No. 91085-2,
equipped with Backshell
Crimper Assembly Tool—
Part No. 856684-1.
For tooling information call
Tooling Assistance Center
1-800-722-1111.
Catalog 82068
Revised 1-08
www.tycoelectronics.com
852423-■ ■
are metric equivalents.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
,
AMPLIMITE Subminiature D Connectors
Shielded AMPLIMITE .050 Series Slimline Connectors, Application Tooling
Note: All part numbers are RoHS compliant.
Wire Setup Gauge
.026-.028
.029-.031
.032-.035
(Requires Die Set Holder
in.
Applicator Part No.
Pneumatic Bench Tool
Part No. 58024-1
Equipped with
Wire Insulation Dia.
Part No. 852423-1 120 VAC
Arbor Tool
No. 312522-3
No. 58449-1)
91291-1
Control Module
852423-2 100 VAC
852423-3 230 VAC
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
0.66-0.71
0.74-0.79
0.81-0.89
mm
Miniature Applicator Frame Assembly
Equipped with Cover Closing Kit
Part No. 543508-1
Part No. 91295-1
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
763382-3
763382-4
763382-5
Part No.
Part No. 354786-1
CHAMPOMATOR
2.5 Machine
26 Position
1-762637-3
Backshell Tooling and
Cover Tooling
To assemble backshell into
plastic housing use Manual
Miniature Applicator Frame
Assembly—Part No. 91295-1
equipped with Part No.
543521-1. To assemble
upper cover on lower
cover use Part No. 91295-1
equipped with Part No.
543522-1.
(For use with Miniature Applicator
Tie Bar
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Staple Insertion Kit
Part No. 543515-1
Frame Assembly
Part No. 91295-1)
35