87077-2 TE Connectivity, 87077-2 Datasheet - Page 94

• Manufacturer Part Number: 87077-2
• Description: Connector Accessories Keying Plug Nylon Natural
• Manufacturer: TE Connectivity
• Type: Keyr
• Series: Mod IVr

Specifications of 87077-2

• Product Length (mm): 2.1mm
• Product Depth (mm): 1.72mm
• Product Height (mm): 15.24mm
• Accessory Type: Keying Plug
• Rohs Compliant: Yes
• Product Type: Accessory
• Connector Series: Mod IV
• Keying Plug Material: Nylon
• Keying Plug Color: Natural
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Lead Free Status / RoHS Status: Compliant
• For Use With: Ampmodu 0.100" Housings
• Lead Free Status / Rohs Status: RoHS Compliant part

5
274
Tooling shown on this page
is designed to terminate
IDC contacts for various
AMPMODU wire-to-board
connectors. Refer to page
88 to determine the appli-
cable connectors.
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
are metric equivalents.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
AMPMODU Interconnection System
Application Tooling for Insulation Displacement Crimp (IDC)
Contacts and Connectors
Tube-Fed Ribbon Cable Machine
Designed for bench appli-
cations, this machine is
pneumatically operated and
controlled by a foot pedal. It
terminates connectors onto
end-notched ribbon cable.
*The connectors are sup-
plied in strip form and in
plastic tubes. The machine
consists of three basic sub-
assemblies: a feed track, a
terminating station and a
seating station. The feed
track is a constant force,
2700 lb. Power Unit With
Cable Notching Die
Note: All part numbers are RoHS compliant.
*At a rate of 13-25 positions at a time.
Tube-Fed Ribbon Cable Machine No. 856002-1
2700 lb. Power Unit
No. 312522-1
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
(Continued)
spring-driven unit which
conveys connectors
through the product tube to
the terminating station. The
air-operated terminating sta-
tion positions and termi-
nates contacts onto the
notched cable. The seating
station is manually operated
and seats connector hous-
ings onto the terminated
contacts.
Equipped with a cable
notching die an adapter kit,
this fully pneumatic bench
machine provides the 2700 lb
[12 010N] force required for
end-notching ribbon cable.
It features a grooved cable
support plate, a pressure
plate and a cable stop to
facilitate cable alignment
and positioning during the
notching process.
Notching Dies:
854449-1 (for 24-22 AWG
854449-2 (for 28-26 AWG
[0.08-0.15 mm
[0.2-0.6 mm
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
2
] Wire
2
] Wire
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208