Q4015LT Littelfuse / Teccor Brand Thyristors, Q4015LT Datasheet - Page 6

• Manufacturer Part Number: Q4015LT
• Description: QUADRAC ISOLATED 15.0A 400V
• Manufacturer: Littelfuse / Teccor Brand Thyristors

Specifications of Q4015LT

• Triac Type: Internally Triggered
• Mounting Type: Through Hole
• Configuration: Single
• Current - Hold (ih) (max): 70mA
• Voltage - Off State: 400V
• Current - Non Rep. Surge 50, 60hz (itsm): 167A, 200A
• Current - On State (it (rms)) (max): 15A
• Package / Case: TO-220-3 Isolated Tab
• Current - On State (it (rms) (max): 15A
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Gate Trigger (igt) (max): -
• Voltage - Gate Trigger (vgt) (max): -

QxxxxLTx Series
Soldering Parameters
Reflow Condition
Pre Heat
Average ramp up rate (Liquidus Temp)
(T
T
Reflow
Peak Temperature (T
Time within 5°C of actual peak
Temperature (t
Ramp-down Rate
Time 25°C to peak Temperature (T
Do not exceed
Physical Specifications
Design Considerations
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
toward extending the operating life of the Thyristor. Good
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
Terminal Finish
Body Material
Lead Material
S(max)
L
) to peak
to T
L
- Ramp-up Rate
- Temperature Min (T
- Temperature Max (T
- Time (min to max) (t
- Temperature (T
- Temperature (t
p
)
P
)
1005 Matte Tin-plated
UL Recognized epoxy meeting
flammability classification 94v-0
Copper Alloy
L
L
)
) (Liquidus)
s(min)
s(max)
s
)
P
)
Teccor
)
)
4 / 6 / 8 / 10 / 15 Amp Quadracs
Pb – Free assembly
150°C
200°C
60 – 180 secs
5°C/second max
5°C/second max
217°C
60 – 150 seconds
260°C
20 – 40 seconds
5°C/second max
8 minutes Max.
280°C
Revised: November 1, 2010 05:04 PM
®
+0/-5
brand Thyristors
160
High Temperature
Voltage Blocking
Temperature Cycling
Biased Temperature &
Humidity
High Temp Storage
Low-Temp Storage
Thermal Shock
Autoclave
(Pressure Cooker Test)
Resistance to
Solder Heat
Solderability
Lead Bend
Environmental Specifications
T
T
S(max)
S(min)
25
T
T
Please refer to http://www.littelfuse.com for current information.
P
L
Test
time to peak temperature
Specifications are subject to change without notice.
t
MIL -STD-750: Method 1040, Condition A
Rated V
hours
MIL -STD-750: Method 1051
-40°C to 150°C, 15-minute dwell,
100 cycles
EIA/JEDEC: JESD22-A101
320VDC, 85°C, 85%RH, 1008 hours
MIL -STD-750: Method 1031
150°C, 1008 hours
-40°C, 1008 hours
MIL -STD-750: Method 1056
0°C to 100°C, 5-minute dwell,
10-second transfer, 10 cycles
EIA/JEDEC: JESD22-A102
121°C, 100%RH, 2atm, 168 hours
MIL -STD-750: Method 2031
260°C, 10 seconds
ANSI/J-STD-002, Category 3, Test A
MIL -STD-750: Method 2036, Condition E
S
Preheat
Preheat
Specifications and Conditions
Ramp-up
Ramp-up
DRM
(VAC-peak), 125°C, 1008
©2010 Littelfuse, Inc
t
t
P
L
Ramp-down
Ramp-do
Time