5749195-2 TE Connectivity, 5749195-2 Datasheet - Page 2

• Manufacturer Part Number: 5749195-2
• Description: Connector Accessories Individual Kit 68POS
• Manufacturer: TE Connectivity
• Type: Kitr
• Series: AMPLIMITE 0.050r

Specifications of 5749195-2

• Product Length (mm): 61.34mm
• Product Depth (mm): 10.16mm
• Product Height (mm): 35.7mm
• Accessory Type: Shielded Backshell Kit
• Cable Exit Angle: 180°
• Connector Body Material: Zinc
• Connector Type: D Sub
• Rohs Compliant: Yes
• Product Type: Hardware
• Mating Connector Lock: With
• Mating Connector Lock Type: Spring Latch
• Product Series: Series III
• Backshell Kit Exit Style: Straight (180°)
• Backshell Material: Zinc
• Screw Material: Stainless Steel
• Strain Relief Clip Material: Steel
• Latching Spring Material: Stainless Steel
• Hardware Type: Backshell Kit
• Shielded: Yes
• Number Of Positions: 68
• Cable Insulation Diameter (mm [in]): 11.18 [0.440]
• Backshell Plating: Nickel over Copper
• Shell Plating: Tin over Nickel
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Wire/Cable
• Lead Free Status / RoHS Status: Compliant
• For Use With: 68 Position AMPLIMITE 0.050 Connectors
• Lead Free Status / Rohs Status: RoHS Compliant part

Product Type Features:
Mechanical Attachment:
Product Type
Number of Positions = 68
Mating Connector Lock
Mating Connector Lock Type
Shielded
Product Series
Backshell Kit Exit Style = Straight (180°)
Backshell Material = Zinc
Screw Material = Stainless Steel
Strain Relief Clip Material = Steel
Latching Spring Material = Stainless Steel
Comment = Each backshell kit includes upper and lower backshells, two
spring latches, one strain relief staple and two 2-56 screws. All are packaged
unassembled; Meets SCSI-2 standards
Hardware Type
= Yes
= Hardware
= Series III
= Backshell Kit
= With
= Spring Latch
Body Related Features:
Industry Standards:
Conditions for Usage:
Other:
Cable Insulation Diameter (mm [in]) = 11.18 [0.440]
Backshell Plating = Nickel over Copper
Shell Plating = Tin over Nickel
RoHS/ELV Compliance
Lead Free Solder Processes
RoHS/ELV Compliance History = Always was RoHS compliant
Terminate To = Wire
Brand = AMP
= RoHS compliant, ELV compliant
= Not relevant for lead free process