1445904-1 TE Connectivity, 1445904-1 Datasheet - Page 31

• Manufacturer Part Number: 1445904-1
• Description: Connector Accessories Jam Nut Brass
• Manufacturer: TE Connectivity
• Type: Nutr

Specifications of 1445904-1

• Product Depth (mm): 3.18mm
• Product Height (mm): 22.25mm
• Accessory Type: Jam Nut
• Width: 0.875"
• Height: 0.125"
• Leaded Process Compatible: Yes
• Thread Size - Imperial: 3/4-20 UNEF-2B
• Rohs Compliant: Yes
• Nut Size: 3⁄4-20
• Nut Type: Jam Nut
• Standards: RoHS, ELV Compliants
• Current Carrying Capacity: 5 Amps
• Operating Voltage: 600 VAC Minimum
• Dielectric Withstanding Voltage: 2200 VAC Minimum Mechanical Specification
• Seal, Wire Entry: Elastomer, Yellow
• Seal, Peripheral: Elastomer, Gray
• Housing: Thermoplastic, Black
• Ring, Coupling: Thermoplastic, Black
• Plate, Seal Retention: Thermoplastic, Black
• Product Type: Accessory
• Shell Size: 11
• Thread Size: 3/4-20
• Jam Nut Plating: Nickel
• Jam Nut Material: Brass
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not reviewed for lead free solder process
• Rohs/elv Compliance History: Always was RoHS compliant
• Lead Free Status / RoHS Status: Compliant
• For Use With: Micro Circular Plastic Connectors
• Lead Free Status / Rohs Status: RoHS Compliant part

82
Side-Feed Heavy-Duty
Miniature Applicators
(coded HDM)
Stripper-Crimper
Applicators (coded SCA)
Stripper-Crimper Machines
AMP-O-MATIC Stripper-
Crimper Machines,
Part Nos. 1320895-1, -2
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Interchangeable applicators
for crimping products
reeled side-by-side on sin-
gle or dual carrier strips
(primarily closed-barrel ter-
minals and open-barrel con-
tacts). Similar design as the
end-feed version. All side-
feed applicators include a
wire stop to help correctly
position the wire end in the
crimping target area.
For more information, request
Catalog 296393-2 and
Instruction Sheet 408-8040.
AMP Circular Connectors for
Commercial Signal and Power Applications
Application Tooling
Interchangeable applicators
for crimping products in
AMP-O-MATIC Stripper-
Crimper Machines. Consist
of separate ram and lower
tooling assemblies. Similar
dial-in settings for different
wire sizes and insulation
diameters as HDM
applicators. Available with
sensors for use with the
Crimp Quality Monitor.
For more information, request Catalog
65004 (AMP-O-MATIC Stripper-
Crimper Machines), Catalog 82275
[Crimp Quality Monitor (CQM)].
Semiautomatic bench
crimping machines that also
strip the wire, and are there-
fore used for terminating
jacketed cable. Feature
manual precision adjust-
ment of crimp height, keyed
strip blades for faster, more
accurate setups, and an
efficient scrap removal sys-
tem. All adjustments can be
made from the front of the
machines without special
tools. Available with crimp
quality monitoring.
For more information, request
Catalog 65004, Video 198075, Catalog
82275 [Crimp Quality Monitor
(CQM)], Video 198094.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
(Continued)
Stripping Module (for the
AMP 3K/40 and AMP 5K/40
Terminating Machines and
AMP-O-LECTRIC Model “G”
Terminator on page 77)
Komax Delta 60
Wire Stripper
Cosmic 30M Wire Stripping
Machine, 5-528367-0
Cosmic 927R Micro-Cable
Stripper
For more information, request
Catalog 1309085.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
Note:
are RoHS Compliant.
All part numbers
The combination of the
Stripping Module with the
AMP 3K/40 and AMP 5K/40
Terminating Machines or
the AMP-O-LECTRIC
Model “G” Terminator
provides an economic and
proficient method of
stripping the wire and
crimping terminals on the
same machine. The module
accepts End- and Side-
Feed HDM Applicators
(32-14 AWG) and operates
in three modes: crimp only,
strip only, or strip and
crimp. It can be installed
on existing machines in the
field or purchased as one
unit from the factory.
The semiautomatic Delta 60 is
designed to strip single- and
multiple-pole conductors with
pull-off lengths of .984 [25] or
3.78 [96]. Thanks to the
electric drive and non-
pneumatic design, the device
is quick and quiet in operation
and can be utilized virtually
anywhere. The Delta 60 can
desheath or strip stranded
conductors and multiple wire
cables with external diameters
of up to .433 [11].
See catalog 1654956 for more information.
The Cosmic 30M is a high
precision, high speed
electrical wire stripper that is
very easy to operate. It’s
equipped with a four blade
system and an optional
gripper for more difficult wires.
There is a digital display for
the wire diameter that can be
set at 0.01 mm increments.
See catalog 1773385-2 for more
information.
The compact, lightweight,
benchtop Cosmic 927R was
designed and developed to
reliably strip various insulation
materials and micro-cable.
From conductor diameter
36 to 10 AWG, the stripping
diameter display can be set to
within 0.1 mm increments.
See catalog 1773385-4 for more
information.
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341